Search found 253 matches

by Daveg2812
Tue Aug 20, 2013 6:49 am
Forum: Boxertech
Topic: RAM Mount for fork leg
Replies: 15
Views: 9055

If I have a (very) slight criticism of the Telferizer mount, it's that it can come loose. It could do with a couple of flats milling on to it so you could get a spanner on it to tighten it. Had considered putting a drop of lock tight on the threads, but was concerned that I then might not get it off...
by Daveg2812
Thu Aug 15, 2013 11:47 am
Forum: Boxertech
Topic: Exhaust refinishing
Replies: 7
Views: 5431

Mine were done at Camcoat in Warrington using their Cermakrome product. http://i569.photobucket.com/albums/ss137/daveg2812/IMG_0494.jpg And on the bike, http://i569.photobucket.com/albums/ss137/daveg2812/bike.jpg Bike's not had a lot of use this year but the finish is still pretty much the same. Cos...
by Daveg2812
Tue Jul 30, 2013 6:52 am
Forum: Boxerbanter
Topic: Boxered Out
Replies: 48
Views: 20952

I'm glad I hadn't ridden a bike for 23 years before I bought my 11S a few years back. After all the negative stuff written about it, I'd have chucked it in a ditch after the first ride :shock: :lol:

I :love9: my S
by Daveg2812
Tue Jul 30, 2013 6:45 am
Forum: Boxerbanter
Topic: Stainless Question
Replies: 6
Views: 4114

There has been countless stuff on here about this subject and some recent stuff about people cleaning up and painting original bolts etc. A few of us asked how this affected the paint once these were tightened, but never got answers. Personally, I cleaned up my caliper bolts with a wire brush and a ...
by Daveg2812
Fri Jul 26, 2013 12:13 pm
Forum: Boxertech
Topic: Exhaust system on BCR? And a few more Q’s
Replies: 19
Views: 11072

Just a thought, but doesn't the stock 1150 engine make less power than the 1100, at least in GS form?
by Daveg2812
Sun Jul 21, 2013 7:45 am
Forum: My other bike's a...
Topic: Goldmember??
Replies: 4
Views: 4928

Neighbour has one, same colour. Sounds great :D
by Daveg2812
Thu Jul 18, 2013 3:43 pm
Forum: Boxerbanter
Topic: Front tyre.....
Replies: 28
Views: 12444

When I had a new front fitted last year to a loose wheel, picked it up from the guy who works from a unit at the back of his home. He was having his tea when I called, but still asked what pressure I ran, checked it and popped in a quick squirt of air before handing it over. It shouldn't be missed, ...
by Daveg2812
Tue Jul 02, 2013 11:34 am
Forum: Days Out
Topic: BMW weekend in Garmisch Partenkirchen
Replies: 26
Views: 16960

Have a good time Dave, and take care mate :D
by Daveg2812
Mon Jul 01, 2013 8:44 pm
Forum: Boxerbanter
Topic: White or Yellow
Replies: 24
Views: 15163

Where's Ben? Didn't he buy a white one recently. I remember it looking rather nice. 😊
by Daveg2812
Fri Jun 28, 2013 12:43 pm
Forum: Boxertech
Topic: LED tail light compatibility
Replies: 7
Views: 5927

Dave, I thought you would have left it in "Moffat State" where everyone thought you just went into bends without braking :lol: But seriously, where did you get it from and any chance of a pic? Bought it on here from a fellow Trixter Dave. Does look good though and is bright. I'll try and ...
by Daveg2812
Thu Jun 27, 2013 12:36 pm
Forum: Boxerbanter
Topic: Interesting spec
Replies: 9
Views: 5437

That bike has been doing the rounds for many years and has been mentioned on here before when it's come up for sale. Would be interesting to have a ride to see what difference the changes have made.
by Daveg2812
Thu Jun 27, 2013 12:33 pm
Forum: Boxertech
Topic: LED tail light compatibility
Replies: 7
Views: 5927

You could try searching for a full replacement rear led lamp unit likethe one I have, which already has the resistor built in. More expensive, but the whole thing looks great and offers more light output. :D
by Daveg2812
Thu Jun 27, 2013 12:26 pm
Forum: Boxertech
Topic: Does the steering feel vague to you?
Replies: 10
Views: 5578

Strange that. When I bought my 1100S 3 years ago after having not ridden a bike for around 23 years, I felt, once I got used to it, that it didn't turn in quickly enough. I've since changed the stock shocks for a pair of Wilbers, the rear having adjustable ride height amongst it's settings. The ride...
by Daveg2812
Sat Jun 15, 2013 1:02 pm
Forum: Boxerspex
Topic: Make your old nuts like new!
Replies: 16
Views: 16917

Hayden wrote: These look good, but how come the paint isn`t damaged when you tighten everything back up?....


Exactly my thoughts as I was reading this. :?
by Daveg2812
Thu Jun 13, 2013 1:26 pm
Forum: Boxertech
Topic: Steering bearings
Replies: 17
Views: 8886

Nik, can't tell you whether you need to remove the bodywork or not, but it's not a big deal. The bolts under the fairing are the most difficult to get at, but it's a piece of cake, and when you done it once, it will hold no fears.

Go to advanced search