www.boxertrix.com

Paul wrote:Hi Mitch,

The invisible selfie stick really lives up to its name in the footage. Here is how I mounted the camera for those shots where you see me on the bike from the front, like the still in my first post:

Cheers,

Paul

Jousting , anyone?

The self cancelling is linked in with the speedo sensor , so at motorway speeds it operates after about 300 metres , in urban areas I tend to cancel it manually.

Before you strip it remove the slave cylinder just to confirm that it's not partially seized, this would be an easy fix if the clutch hasn't been slipping badly. While there, if there's oil or brake fluid visible in the orifice this could also be the cause of the problem and depending how bad may be...

Some threads here on removing the switch / internals/ barrel. If the repair kit mentioned in the thread includes tumblers to mix & match to an existing key maybe a lock smith can do the reverse? http://www.boxertrix.com/phpBB2/viewtopic.php?f=14&t=23930&hilit=grub http://www.boxertrix.co...

Madmax wrote:. Aybody undertakenthis job.

Luckily not yet..... but plenty on here have


viewtopic.php?f=4&t=3736&hilit=clutch

boxerscott wrote: any tips?

Chris

Bring your lace up leather chaps....

Looks great !
As this is a BMW forum , what's the MPG like....?

Blackal wrote:Where’s the engine?

I know , my part of the world has gone like France , all 80kph limits , so is ideal for that...

Steve , let us know what you think of it if you ever get around to riding it!

Paul wrote:That pannier on the left side of the bike looks enormous

Enjoy!

Paul

It is, but its got it own wheels ..

That's the sort of pad you need .

I had a load of fun On a CBF 250 over the last 18 months despite the lack of go so when I had the chance to "upgrade" to something a little kinder to my 6' 4" frame with no cash outlay ( swopped two bikes with cash to me) I jumped in . It has the full Charley and Ewan luggage kit so I...

Afaik only the OE pads have that spring , so I guess either live with it or fit OE pads . I have different retro fitted 2 pin brembo calipers on my bike ( without an anti rattle plate and they rattle nicely ! I have a similar caliper on the front of my Guzzi which has an anti rattle plate fitted but...

I noticed a few months ago that my centre stand was a quite loose on its pivots and not lifting the rear wheel as high as usual , so I sprayed plenty of penetrating oil on the retainers since then and recently stripped out the stand to reveal this on the L/h side... I guess I'll need to lubricate it...

Did anyone ever try purchasing an aftermarket exhaust for say an older motorcycle that was deemed by the supplier to be Mot friendly whatever that means ? I did and had to remove it after a couple of weeks because it was ear splittingly too loud with baffle fitted. The alternative was an OE item tha...