Search found 79 matches

by Delpel
Mon Apr 17, 2006 10:53 am
Forum: Boxertech
Topic: Radial Shaft Oil Seal
Replies: 3
Views: 3522

Cool cheers chaps.

I have found one sized at 30-42-8 which is 1mm thicker than that fitted. The stock item is 30-42-7

At £1.40 I couldn't resist and will give it a try.

Again thanks for the advice.
by Delpel
Sun Apr 16, 2006 4:12 pm
Forum: Boxertech
Topic: Radial Shaft Oil Seal
Replies: 3
Views: 3522

Radial Shaft Oil Seal

Does anybody know of an alternative to the radial shaft oil seal. The one that sits in the front cover behind the hall effect pickups.

It looks like a bog standard oil seal but as luck would have it the BMW dealer here in Cyprus doesn't have one in stock.

Regards

Del
by Delpel
Sat Dec 10, 2005 10:51 am
Forum: Boxertech
Topic: Warped discs (AGAIN!) - any advice on replacements?
Replies: 19
Views: 12121

PM'd you
by Delpel
Tue Nov 29, 2005 6:37 pm
Forum: Boxertech
Topic: Delpel=1 - ABS/Servo=0
Replies: 2
Views: 3453

Well I finally nearly finished this project. I have posted a thread on the UKGS'er site.

http://www.ukgser.com/forums/showthread.php?t=58903

Thanks to all you guys who offered your pearls of wisdom in my numerous hours of need
by Delpel
Sat Nov 26, 2005 4:54 pm
Forum: Boxertech
Topic: Delpel=1 - ABS/Servo=0
Replies: 2
Views: 3453

Delpel=1 - ABS/Servo=0 Continued

The options for the front end were braided lines or a u-link from BMW. This piece is specified for non-ABS fitted bikes. It came down to costs at the end of the day. The u-link replaces the distribution block that runs to the ABS control unit and joins the lines directly to the calipers. Simply a ca...
by Delpel
Sat Nov 26, 2005 4:52 pm
Forum: Boxertech
Topic: Delpel=1 - ABS/Servo=0
Replies: 2
Views: 3453

Delpel=1 - ABS/Servo=0

Finally finished ripping out the ABS/Servo system on my 2003 R1150GS rebuild project. The story so far. Back in June, I brought a crashed 2003 R1150GS, Blue/White with 10,000KM on the clock for approx £360 GBP. Spent just over £800 GBP on spares etc and rebuilt her. Unfortuently the ABS control was ...
by Delpel
Sat Nov 26, 2005 4:48 pm
Forum: Boxertech
Topic: Replacing the Timing Cover Plug
Replies: 12
Views: 6636

Yep,

Try using a pair of tweezers to hold it in place and then a long screwdriver to push it in. Try not to push it in to far otherwise you'll be extremely peeved off if it plops inside you engine.
by Delpel
Fri Nov 25, 2005 4:44 pm
Forum: Boxertech
Topic: wiring diagram
Replies: 16
Views: 10199

Adamski,

Have you got the rest of the circuit diagrams. If so can I get scanned copies of you?
by Delpel
Tue Nov 08, 2005 1:52 pm
Forum: Boxertech
Topic: Help - Servos/ABS will not reset.
Replies: 0
Views: 2132

Help - Servos/ABS will not reset.

Just suffered the first major set back with my 2003 R1150GS rebuild. The bike is equipped with ABS and servo assisted brakes. The brakes have not been operated for nearly 2 years after after it was involved in a head-on crash. When you switch the ignition on (with a brand new Hawker Odessy battery, ...
by Delpel
Mon Oct 10, 2005 5:31 pm
Forum: Boxertech
Topic: ABS Pump failure
Replies: 12
Views: 8006

There have been lots of examples of this happening. Brake failing leaving you with residual brakes only. Check out the GS and ADV sites. :shock: On the GS I am rebuilding I am having issues with the Servo/ABS system The answer is to rip all that crap out, fit straight through braided lines to each c...
by Delpel
Sun Sep 25, 2005 2:14 pm
Forum: Boxertech
Topic: Back end oil leak
Replies: 5
Views: 4910

Back end oil leak

Noticed some oil around the large rubber gaitor before the final drive unit. Upon further investigation I also noticed a small leak from the rubber gaitor at the gearbox. This leak leads me to believe the leak is at the gearbox end and running down the inside of the swinging arm. We are not talking ...
by Delpel
Sun Sep 18, 2005 6:40 pm
Forum: Boxertech
Topic: Rear Brake Jammed ( again )
Replies: 8
Views: 4780

Paul the GS is coming along great. Nearly finished, just waiting on a pair of front discs and half a cock eyed headlight unit. Having some ABS issues though. Might end up ripping the whole lot out and running braided lines straight from the master cylinders to the calipers. Anybody done this on an 1...
by Delpel
Sat Sep 17, 2005 5:40 pm
Forum: Boxertech
Topic: Rear Brake Jammed ( again )
Replies: 8
Views: 4780

It couldn't be the anti rattle spring in the wrong place. I removed the pads, pins and spring when I cleaned mine up and got confused as to the springs location. When you look at the inside of the caliper it looks like the spring should sit in the middle of the pads. Not so as I found out when every...
by Delpel
Mon Sep 05, 2005 5:48 pm
Forum: Boxertech
Topic: Oil / Fluid leak
Replies: 9
Views: 6478

PB,

I did the same as Yogi Bear. Remember a small amount of hot oil goes a long way.

Mines a 2002 BCR with 9000 miles. :oops: :oops: :oops:

Yeah Yeah Yeah, I know but Cyprus is a small island.
by Delpel
Wed Aug 31, 2005 5:53 pm
Forum: Recommended products/services
Topic: Roadtecs - the first 1500 miles
Replies: 46
Views: 29687

Paul,

What did you think of the Brake - Brake discs?

£70 seems awfully cheap. You know what they say, if it seems to cheap it probably is.

Go to advanced search