www.boxertrix.com

Hi all, Thanks for your replies, I did order the lsl bar riser kit but cancelled after Big Rob advised that you would need to fit a longer brake line the reason being is that I replaced the oem brake lines with Venhill lines prior to thinking about changing the bars and had a nightmare of a job tryi...

Hi Keith, we put a straight bar conversion on my wife's 11S just over a couple of years ago. LSL in Germany manufactured the kit we bought, conversion kit can be found on Ebay, the kits cost +/- 300 Euro's The riding position is obviously more upright which both my wife and I (when I blag a shot of...

Hi all, Has anyone done a straight bar conversion to their 11s and if so can I have your views on Make, Cost, Type and if its improved the ride and handling of the bike.
Cheers Guys.

Hi Tunneruk, Nice looking job, I was looking to do similar on my 11s but noticed that your yoke clamps are different to mine, what year is your 11s, mines a 2003 model.
KeithW

I've just looked at the Shock Factory website - the price for a pair now seems to be £700 rather than the £550 paid by Rich back in January. That's a hell of an increase! It can't be Brexit-related, the exchange rate is much the same as it was back in January. :? Pete Hi Pete, The list price for my...

Hi All, Brake lines installed and now having problems bleeding, we have a 2003 R1100s with a servo ABS system, we are getting fluid to the ABS unit but not down to the callipers. After calling BMW they have advised that this can only be done using the diagnostic tool which I have also discovered thi...

Hi Guys, Have bought a set of these for my 11s after looking at the other options and costs available, not yet tested as I am upgrading other bits to the bike but after speaking to Mike Capon and reading the reviews it was a no brainer really.
These shocks are a quality bit of kit.

SP250 wrote:Heat it up again then put a 3 or 4 foot length of pipe onto the socket breaker bar to give you more leverage.
Probably better get a second pair of hands to stop the bike falling over too.

Thanks for the advice.
Keith W

Hi, Can anyone tell me the best method to undo the the lower front fork brace suspension nut, have tried heating the nut as per the workshop manual but it will not budge. Also I assume it's a right handed thread.
Cheers.

RSBowling wrote:Hello mate,
I use ebc hh sintered pads. Would not look to try anything else. Really good pad.
Rich

Thanks Rich.

Hi All, at the moment I'm upgrading my R11 brake lines and looking to replace the brake pads front and rear. Can anyone give me some tips on the preferred make of replacement pads as there are a few to choose from.
Cheers

Al wrote:Keith, if you find you need a couple of small P clips for the fork legs let me know, I have access to various sizes and stainless screws.

Al.

Thanks for the offer, will contact you if needed.
KeithW

Thanks for the advice guys it gives me a couple of options to choose from.
Cheers

Hi All, New to the forum having just acquired a 2003 r1100s. I'm looking to replace the brake lines and would like to know if there is any difference in length of the brake lines between a 2003 BCR and my r1100s. Cheers Brake lines installed and now having problems bleeding, we have a 2003 R1100s wi...