Search found 83 matches

by KTM AL
Wed Feb 14, 2018 7:41 pm
Forum: Boxertech
Topic: Battery R12S - will 150A cranking do?
Replies: 10
Views: 7297

Re: Battery R12S - will 150A cranking do?

Thanks for that , didn't realise it was a Lithium iron battery. Not a big fan as my Optimate won't chare it.
by KTM AL
Wed Feb 14, 2018 6:32 am
Forum: Boxertech
Topic: Battery R12S - will 150A cranking do?
Replies: 10
Views: 7297

Re: Battery R12S - will 150A cranking do?

I don't have a 1200S but afaik the std battery listed (Yuasa catalogue) is Ytx14bs or equivalent which is 200amp cca, they list an uprated one also with 240cca. For me the original 200cca would be the minimum . Got hold of a 300A cheaply so all good :) Hello Can you please tell me what make and whe...
by KTM AL
Fri Jan 19, 2018 6:07 pm
Forum: Boxertech
Topic: John Gemi Tuning Chip - my experience
Replies: 10
Views: 19501

Re: John Gemi Tuning Chip - my experience

This is interesting, as I have just removed my John's chip and installed a booster plug. I had a stage 10 chip and I think it was over fueling as any mate behind me complained of my bike smelling of unburnt fuel. Just got a K&N and a Vanderline mid pipe and end cans. Would be a good idea to sti...
by KTM AL
Fri Jan 19, 2018 6:04 pm
Forum: Boxertech
Topic: John Gemi Tuning Chip - my experience
Replies: 10
Views: 19501

Re: John Gemi Tuning Chip - my experience

bfisher wrote:@KTM AL: Are you targeting track setup? I was told by John not to go for a stage 10 for road use if I recall correctly...

B

The bike is used on the road. John sent me his new stage 10 going on the air filter and pipe
by KTM AL
Tue Jan 16, 2018 5:13 pm
Forum: Boxertech
Topic: John Gemi Tuning Chip - my experience
Replies: 10
Views: 19501

Re: John Gemi Tuning Chip - my experience

This is interesting, as I have just removed my John's chip and installed a booster plug. I had a stage 10 chip and I think it was over fueling as any mate behind me complained of my bike smelling of unburnt fuel. Just got a K&N and a Vanderline mid pipe and end cans. Would be a good idea to stic...
by KTM AL
Sun Dec 31, 2017 1:01 pm
Forum: Boxertech
Topic: I-ABS removal part 2
Replies: 10
Views: 9282

Re: I-ABS removal part 2

Hi I know this is a really old post, but if anybody is still on this forum I'd just like to say thank you for your posts as I have just got rid of the ABS unit. When I bought the bike the ABS had already been 'professionally' removed but the unit itself was still on the bike. As I had it to bits swa...
by KTM AL
Sat Dec 30, 2017 7:42 pm
Forum: Boxerspex
Topic: Home made SatNav mount
Replies: 5
Views: 11577

Re: Home made SatNav mount

Nice job. Is that a Fantic I see?
by KTM AL
Wed Aug 02, 2017 4:25 pm
Forum: Boxertech
Topic: alarm
Replies: 7
Views: 5301

Re: alarm

I too have a dead Datatool alarm on my 1100s which I found after I bought it . I was thinking of trying to revive it as I have all the paper work and two fobs. Still a bit worried it might one day immobilise or go off and the fob will still be in the kitchen draw.
by KTM AL
Fri Jun 09, 2017 4:54 pm
Forum: Bits'n'bobs for sale
Topic: Y-piece wanted
Replies: 4
Views: 4691

Re: Y-piece wanted

Hi
I have a nice Danmoto cat eliminator Y piece for sale due to recent up grade, only been on for about 500 miles or so. £60 + £12 p&p or collect from West Sussex
by KTM AL
Thu Jun 08, 2017 7:19 pm
Forum: Boxertech
Topic: Diff oil change?
Replies: 1
Views: 2673

Diff oil change?

Hello
Although my 1100s has only done less than 7k miles ,it is 15 years old so do you think the diff oil should be changed?
by KTM AL
Fri Jun 02, 2017 3:37 pm
Forum: Boxertech
Topic: Wider rear wheel for R1200S
Replies: 5
Views: 5239

Re: Wider rear wheel for R1200S

Hi
Yes a narrower tyre will make the bike turn in better. On my GSXR I have a 185 instead of the 195 width and it does make a difference, so putting a wider tyre or wheel on will make it turn slower in to the bends.
by KTM AL
Fri Jun 02, 2017 3:30 pm
Forum: Boxertech
Topic: R1100S Dipped headlight not firing up
Replies: 12
Views: 9154

Re: R1100S Dipped headlight not firing up

Hi
Can you swap the feed from the Hi beam to low to prove the HD unit works ok. If it does the its the wiring or relay.
by KTM AL
Wed May 31, 2017 3:45 pm
Forum: Boxertech
Topic: 10 to 20% Power increase!
Replies: 22
Views: 15266

Re: 10 to 20% Power increase!

Just received a reply from Steve - That element of the instructions is for Airhead 2v engines only and is not applicable to the 4v Models. We have been working on a new version for both single and twin spark 4 v models, which we have now perfected and is with our production engineers, this will be a...
by KTM AL
Tue May 30, 2017 7:56 pm
Forum: Boxertech
Topic: 10 to 20% Power increase!
Replies: 22
Views: 15266

Re: 10 to 20% Power increase!

Hi All I have been reading up on these and in the Motor Works instructions ' with twin sparking an engine the retard is more efficient if the ignition sweep is reduced rather than simply retarding the whole ignition. This can be done by simply altering the flyweight stops within the ignition trigger...
by KTM AL
Mon Jan 30, 2017 9:21 pm
Forum: Boxerpix
Topic: Fully Laden
Replies: 19
Views: 15962

Re: Fully Laden

Back in 1991 somewhere in France ,before buying camping chairs ,snorkles and goggles... Found the rack welds had snapped once we got home it did had adverse handling around long fast sweeping corners though.
Image

Go to advanced search