www.boxertrix.com

Hi All My bike hasn't been out for a while, and over Christmas I fitted a new battery, fitted upgrade Bosch injectors and an oil / filter change, I went out for a quick spin , after about 10miles the bike cut out for just a split second whilst overtaking a car, ran ok for another mile and did the sa...

Hi
I have used the fender mount on my FJR1300 and used a plastic spacer with a protective piece of rubber tape for the LED spot light to clear the fender and aid grip. I may have used a longer bolt and put a lock nut on the inside.

Hi Dave
I have received the same email.
I think I will try the shorter torque arm from a GS first and see how that goes before forking out for a new modified Telelever arm.

ianbcr wrote:No Al i didnt send an email, but if you can wait until the weekend i will get it out the garage and take some pics for you.

That would be great thanks. Anymore BCR bits in there?

popsky wrote:I’m not sure if these people are still active, might be worth a try


viewtopic.php?t=20727

Hi
I did see this but the chap has not been on here for 2 years. I did send an email on the off chance. Cheers

On the off chance has anyone got for sale or could do a 10mm off set Telelever mod?

Hi Ian
I am interested in your stand and did send you a PM this morning,not sure it went though Cheers Al

Hi Chaps Thank you for replies. I'm after a simple quick stand to lift both wheels off the ground for tyre warmers. I have an Abba stand but it would be too much fafing about at the track as there are 7 sessions. I have seen some photos of Boxer cup bikes with a paddock stand under the rear foot peg...

Hi Chaps I'm pondering whether to get another cheap R1100s or use the one I have to do a few track days next year. Last time out I left the centre stand on as I needed it for the tyre warmers between sessions. It decked out a bit, so I'm thinking a temporary stand or front and rear stands instead . ...

Cheers Pete
Did the end cap on the right hand throttle body come off easily? Any tips ? Cheers Al

Hi Pete
Would it be ok to post this on the UKGSER.COM web site? It looks like the 1100S has the same throttle bodies as my 1150GS. I'm just about to make a order from Bearing Boys. Cheers

It was a great day out Yogi. Last one on the 1100s as I now have some sticky tyres for my TT600 and a set of wets, so it may never rain at Brands Hatch again.

That was great that

Yes the stand did touch down round Druids a bit. Only left it on as I need it to put tyre warmers on, I don't have a paddock stand.

Had a wet start to the first track day of the year at Brands on Thursday 14/3/2019 .After lunch the sun came out which was a lot better as I don't have a set of wets. Think it might be the last on the 1100S as it is a bit good for the track, got a TT600 in the garage so might use that in future. htt...