Search found 29 matches
- Sat Sep 02, 2017 6:24 pm
- Forum: Boxertech
- Topic: Bar Conversion
- Replies: 9
- Views: 7763
Re: Bar Conversion
Hi all, Thanks for your replies, I did order the lsl bar riser kit but cancelled after Big Rob advised that you would need to fit a longer brake line the reason being is that I replaced the oem brake lines with Venhill lines prior to thinking about changing the bars and had a nightmare of a job tryi...
- Sat Aug 26, 2017 6:10 pm
- Forum: Boxertech
- Topic: Bar Conversion
- Replies: 9
- Views: 7763
Re: Bar Conversion
Hi Keith, we put a straight bar conversion on my wife's 11S just over a couple of years ago. LSL in Germany manufactured the kit we bought, conversion kit can be found on Ebay, the kits cost +/- 300 Euro's The riding position is obviously more upright which both my wife and I (when I blag a shot of...
- Thu Aug 24, 2017 1:47 pm
- Forum: Boxertech
- Topic: Bar Conversion
- Replies: 9
- Views: 7763
Bar Conversion
Hi all, Has anyone done a straight bar conversion to their 11s and if so can I have your views on Make, Cost, Type and if its improved the ride and handling of the bike.
Cheers Guys.
Cheers Guys.
- Mon Jul 17, 2017 10:16 am
- Forum: Boxerspex
- Topic: R1100s Sat Nav mount
- Replies: 12
- Views: 22455
Re: R1100s Sat Nav mount
Hi Tunneruk, Nice looking job, I was looking to do similar on my 11s but noticed that your yoke clamps are different to mine, what year is your 11s, mines a 2003 model.
KeithW
KeithW
- Thu Apr 06, 2017 4:47 pm
- Forum: Boxertech
- Topic: Shock factory by Mike capon
- Replies: 37
- Views: 19939
Re:
I've just looked at the Shock Factory website - the price for a pair now seems to be £700 rather than the £550 paid by Rich back in January. That's a hell of an increase! It can't be Brexit-related, the exchange rate is much the same as it was back in January. :? Pete Hi Pete, The list price for my...
- Mon Mar 20, 2017 7:06 pm
- Forum: Boxertech
- Topic: Brake Bleeding problem
- Replies: 2
- Views: 3440
Brake Bleeding problem
Hi All, Brake lines installed and now having problems bleeding, we have a 2003 R1100s with a servo ABS system, we are getting fluid to the ABS unit but not down to the callipers. After calling BMW they have advised that this can only be done using the diagnostic tool which I have also discovered thi...
- Sat Mar 04, 2017 10:34 am
- Forum: Boxertech
- Topic: Shock factory by Mike capon
- Replies: 37
- Views: 19939
Re: Shock factory by Mike capon
Hi Guys, Have bought a set of these for my 11s after looking at the other options and costs available, not yet tested as I am upgrading other bits to the bike but after speaking to Mike Capon and reading the reviews it was a no brainer really.
These shocks are a quality bit of kit.
These shocks are a quality bit of kit.
- Sun Jan 22, 2017 3:33 pm
- Forum: Boxertech
- Topic: Stubborn Nut
- Replies: 6
- Views: 5927
Re: Stubborn Nut
SP250 wrote:Heat it up again then put a 3 or 4 foot length of pipe onto the socket breaker bar to give you more leverage.
Probably better get a second pair of hands to stop the bike falling over too.
Thanks for the advice.
Keith W
- Sat Jan 21, 2017 5:56 pm
- Forum: Boxertech
- Topic: Stubborn Nut
- Replies: 6
- Views: 5927
Stubborn Nut
Hi, Can anyone tell me the best method to undo the the lower front fork brace suspension nut, have tried heating the nut as per the workshop manual but it will not budge. Also I assume it's a right handed thread.
Cheers.
Cheers.
- Wed Jan 18, 2017 9:26 pm
- Forum: Boxertech
- Topic: Brake Pads
- Replies: 2
- Views: 2859
Re: Brake Pads
RSBowling wrote:Hello mate,
I use ebc hh sintered pads. Would not look to try anything else. Really good pad.
Rich
Thanks Rich.
- Wed Jan 18, 2017 11:42 am
- Forum: Boxertech
- Topic: Brake Pads
- Replies: 2
- Views: 2859
Brake Pads
Hi All, at the moment I'm upgrading my R11 brake lines and looking to replace the brake pads front and rear. Can anyone give me some tips on the preferred make of replacement pads as there are a few to choose from.
Cheers
Cheers
- Thu Jan 12, 2017 11:40 am
- Forum: Boxertech
- Topic: Braided Hoses
- Replies: 13
- Views: 7748
Re: Braided Hoses
Al wrote:Keith, if you find you need a couple of small P clips for the fork legs let me know, I have access to various sizes and stainless screws.
Al.
Thanks for the offer, will contact you if needed.
KeithW
- Wed Jan 11, 2017 9:18 am
- Forum: Boxertech
- Topic: Braided Hoses
- Replies: 13
- Views: 7748
Re: Braided Hoses
Thanks for the advice guys it gives me a couple of options to choose from.
Cheers
Cheers
- Tue Jan 10, 2017 7:56 pm
- Forum: Boxertech
- Topic: Braided Hoses
- Replies: 13
- Views: 7748
Braided Hoses
Hi All, New to the forum having just acquired a 2003 r1100s. I'm looking to replace the brake lines and would like to know if there is any difference in length of the brake lines between a 2003 BCR and my r1100s. Cheers Brake lines installed and now having problems bleeding, we have a 2003 R1100s wi...