www.boxertrix.com

Bret

Check that there is not a small stone under the gear shift linkage.

Steve

I was given the single barreled version a year or so ago and find it very good although the pressure dial is U/S.

Steve

Went to Mitchedever tyres over the weekend for a new set of Z6's. I was advised that Metzler now have a special tyre for the rear of the 'S' (at least for the 5.5" tyre) and is denoted by a suffix 'B'. Metzlers guide states that the tyre has a stronger tyre wall. None currently in stock but on their...

Hi

I powerd mine by splicing into the accesory lead and have had no problems so far, also alows you to disconnect the power if you are not using the GPS for a while.

I have also haird wired the sound output into the autocom box.



Steve

Jason

Many thanks for the info.

Will go buy the seals tomorrow and try and fit them on Monday.

Steve

Noticed yesturday that the nearside front fork seal is weeping oil.

Anyone replaced these, if so is it a big job, any tips.

Thanks - Steve

Minivin

Mine did exactly the same after nearly 6.5K.


Steve

I have been thinking about having a ‘Tracker’ system fitted to the bike and spoke with their London centre (Tel 020 88388838) and was given the following information. Tracker Retrieve One off fee of GBP624 Inc VAT covering fitting and lifetimes membership or GBP299 + GBP109 per year With this option...

Hew

When I was at the NEC looking at the Schuberth / Rukka / Daytona stand and in one of the desplay windows they had a new communications system based on blue tooth technology, so might be worth giving the uk importers a call to check it out

Steve

Paul

See the botom of the below link which gives the memory size required for the Garmin mapping

http://www.gps-systems.co.uk/garmin_str ... t_2610.asp


Steve

Jason

Wunderlich do a part that clamps to the centre stand and has a rubber stop on it that goes against the Paralever arm.
Part No. is 8600040 - do not have the price as their UK cataloge conveniently does not give prices

Steve

Harry
If you change stands would suggest you buy a new retaining bolt at the same time (On sale or return if possible) as it would seem that some of the side stands have a different thread size, as I found to my cost when I did mine.

Steve

Mick

Try the following link to M Tec in Germany, for a circuit board full of LED's for the rear light - €79 / 89 or the version sold by Motorworks for €129

http://www.boxerparts.com/

You will find it under Online shop / LED Rucleuchten & Blinker

Steve

Hi
Both Julian & I brought a lowering kit from Australia - I seem to remember quite cheap compared with the US versions.
I will post the details tonight when I have found the details.

Steve

Rob

I have the baglux map pocket which is okay although I do not use it now as I permanently run with Shibuya tank bag, which has a map pocket on it.

Steve