Wanted: .... Lennies Intake

PRIVATE sales only please.

Moderators: Gromit, Paul, slparry

User avatar
slparry
Moderator
Posts: 6589
Joined: Sat Sep 20, 2008 7:19 pm
Location: Wrexham
Contact:

Wanted: .... Lennies Intake

Postby slparry » Thu Sep 15, 2022 12:10 pm

Long shot I know but has anyone got one languishing in their garage that needs a new home ;)
--
Steve Parry


Current fleet: '14 F800GS, '87 R80RS, '03 R1100S BoxerCup, '15 R1200RT LE Dynamic, '90 K1

User avatar
nab 301
Member
Posts: 2374
Joined: Sat Dec 04, 2004 6:41 pm
Location: Dublin Ireland

Re: Wanted: .... Lennies Intake

Postby nab 301 » Sat Sep 17, 2022 12:29 pm

I'll keep in touch , I may be removing my 11s from my multibike policy at renewal end of October... Don't be afraid to remind me!
_________________
Nigel

Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..

User avatar
slparry
Moderator
Posts: 6589
Joined: Sat Sep 20, 2008 7:19 pm
Location: Wrexham
Contact:

Re: Wanted: .... Lennies Intake

Postby slparry » Wed Sep 21, 2022 11:52 am

nab 301 wrote:I'll keep in touch , I may be removing my 11s from my multibike policy at renewal end of October... Don't be afraid to remind me!


:thumbleft:
--
Steve Parry


Current fleet: '14 F800GS, '87 R80RS, '03 R1100S BoxerCup, '15 R1200RT LE Dynamic, '90 K1

bfisher
Posts: 224
Joined: Mon Jan 12, 2015 10:37 pm
Location: SW London

Re: Wanted: .... Lennies Intake

Postby bfisher » Sun Oct 09, 2022 2:50 pm

I've pinged Mark (Lennie) but 12 months ago he was looking for a new supplier & looking to go down the plastic route as he needed a new manufacturer & costs were coming out around $900 AU ... Not that this helps you but let you know what he say! I do have one, but its only in the garage as its not on the bike; but its one of those items even if i part ways with bike, not sure i will get rid of it.. just in case... there may be a chance one day i could get them sent across if i know someone heading this way to save on some air-fare (i'm originally from Melbourne).

User avatar
slparry
Moderator
Posts: 6589
Joined: Sat Sep 20, 2008 7:19 pm
Location: Wrexham
Contact:

Re: Wanted: .... Lennies Intake

Postby slparry » Mon Oct 10, 2022 4:34 pm

bfisher wrote:I've pinged Mark (Lennie) but 12 months ago he was looking for a new supplier & looking to go down the plastic route as he needed a new manufacturer & costs were coming out around $900 AU ... Not that this helps you but let you know what he say! I do have one, but its only in the garage as its not on the bike; but its one of those items even if i part ways with bike, not sure i will get rid of it.. just in case... there may be a chance one day i could get them sent across if i know someone heading this way to save on some air-fare (i'm originally from Melbourne).


thanks, I'm happy to have plastic rather than CF if it makes it less expensive, seeing as it's hidden away :D
--
Steve Parry


Current fleet: '14 F800GS, '87 R80RS, '03 R1100S BoxerCup, '15 R1200RT LE Dynamic, '90 K1

bfisher
Posts: 224
Joined: Mon Jan 12, 2015 10:37 pm
Location: SW London

Re: Wanted: .... Lennies Intake

Postby bfisher » Mon Oct 10, 2022 8:43 pm

Lennie confirmed, inlet ducts of his variety are a thing of the paste... No more to be reproduced. B

SP250
Posts: 982
Joined: Mon Sep 09, 2013 2:01 pm
Location: Shropshire

Re: Wanted: .... Lennies Intake

Postby SP250 » Mon Oct 10, 2022 10:50 pm

Simples
Take the one you have and make female half moulds from it to lay up as many copies as you want.
Can make them in plastic, Glass or Carbon then and way cheaper than £512 ($AUS900) including the mould material.
Just need to get permission to do it from Mr Lennie if you're going to sell them commercially.
John M


Return to “Bits'n'bobs for sale”

Who is online

Users browsing this forum: No registered users and 29 guests