R1200S DOHC Project

As it says; what you've done to your bike and how it helped make it better.

Moderators: Gromit, Paul, slparry

Stephen400
Posts: 11
Joined: Sun Oct 08, 2023 9:41 pm

R1200S DOHC Project

Postby Stephen400 » Mon Jan 22, 2024 11:30 pm

I've fancied the idea of a 1200s for a few years now. So when this one was listed on ebay for £1300, well, who wouldn't jump on a deal like that!

IMG_8725 Large.jpeg
IMG_8725 Large.jpeg (447.42 KiB) Viewed 1600 times


It had 107000 miles on the clock and it looked exactly as you'd expect. Mechanically ok, not perfect. Someone has painted it black and white, which is imo the worst part :lol:

The initial plan, as I don't currently have a rideable bike, was to fettle it and run it for the season. Then possibly do an engine swap/total overhaul.

Ideally I would like a liquid cooled R1200/1250/1300S but I don't think theres much chance of BM bringing one of those out any time soon.
I did consider making one of my own but this would be much more expensive and more like fitting R12S bodywork to an LC chassis.


I dropped on a 2019 R nine T engine with 3k miles. There was a special offer on at an ebay breaker. I think I paid £1200. Engine, gearbox, starter, alternator + Throttle bodies. Bargain! The DOHC is a much nicer engine overall, definitely the best of the oil cooled twins. Overall smoother and tighter feeling than the earlier engines (of which the 1200S is the best with its extra 20 horses :) )

IMG_8363 Large.jpeg
IMG_8363 Large.jpeg (343.77 KiB) Viewed 1600 times


I threw it on the bench and tore it into a million bits...

IMG_8741 Large.jpeg
IMG_8741 Large.jpeg (388.57 KiB) Viewed 1600 times


I bought a set of sunfaded Option 719 rocker covers. They were black and gold but faded to marker pen purple. I had them coated with Cerakote black and hand polished the edges back to aluminium.

AC650DC5-6030-469E-B030-31E3985A8515 Large.jpeg
AC650DC5-6030-469E-B030-31E3985A8515 Large.jpeg (338.47 KiB) Viewed 1600 times


I sent the frame + subframe, swing arm + axle, Front wishbone to Triple S powder coating. I didnt send the wheels as I don't like the standard rims. I chose R nine T 5 spoke cast rims because I like the aftermarket look of them.


I discovered the 1200s exhaust is a larger diameter than the DOHC engine manifold so I had to buy a china special pie cut stainless downpipes. Im blown away by the quality and fitment. I will need to manufacture a link pipe in order to fit the underseat exhaust (standard for now. Akra in the future [i hope])

010B2D7A-2DD0-49DA-887A-3E3DCD5F28CC Large.jpeg
010B2D7A-2DD0-49DA-887A-3E3DCD5F28CC Large.jpeg (665.83 KiB) Viewed 1600 times


Really struggle to get the colour on camera. Its powder coat, 'Illusion Purple' and its stunning :bounce:

A098367C-2655-4EF1-8FDB-6BB01A414F70 Large.jpeg
A098367C-2655-4EF1-8FDB-6BB01A414F70 Large.jpeg (530.37 KiB) Viewed 1600 times



The overall goal is to modernise the S BUT still keeping it an R1200s with the following:

    DOHC Engine
    LED DRL
    LED headlight/indicators
    Electronic Cruise Control
    Possibly S1000RR mirrors (thinking the 2019 model ones may fit. dont know yet)
    Custom colour switchgears
    Probably loads of other bits :lol:

(As if they'd kept the model in the line up)



Theres much more to come. Let me know what you think :D

User avatar
dark_knight87
Posts: 64
Joined: Fri Aug 07, 2009 7:34 am
Location: Rowley Regis - West Midlands

Re: R1200S DOHC Project

Postby dark_knight87 » Tue Jan 23, 2024 1:03 pm

Thanks for the post, will be interested in further updates.

Just a quick question? - will you be using the R1200 wiring loom or do you need to use the R9T's one?

Regards,
Russ
It started badly, it tailed off a little in the middle and the less said about the end the better, but apart from that it was excellent.

User avatar
ianc53
Member
Posts: 701
Joined: Thu Feb 19, 2004 5:22 pm
Location: The Kingdom of Fife

Re: R1200S DOHC Project

Postby ianc53 » Tue Jan 23, 2024 1:43 pm

Keep the updates coming, I will be very interested to see what it looks like when it's finished.

All the best

Ian
Motorrad R1250RS SE 2023
Blue R100RS 1980
Suzuki GT250B 1977

User avatar
f90x
Member
Posts: 2773
Joined: Mon Jul 16, 2007 5:38 pm
Location: norf lundun

Re: R1200S DOHC Project

Postby f90x » Tue Jan 23, 2024 1:44 pm

I think that was 'Humbug'. Well known here. I loved my S and owned it 11yrs. I always thought a twin cam version would be superb. Are you going to tweak the motor to get the 120hp of the 'twin spark'
R1200GS TC. Triple Black
R1200S. It’s gone. Had it 11yrs. My favourite bike in 42yrs riding.

Holdsworth professional
Motobecane C3
Brompton

User avatar
jeznewsome
Posts: 333
Joined: Sat Aug 04, 2012 7:30 am
Location: Preston, Lancs

Re: R1200S DOHC Project

Postby jeznewsome » Tue Jan 23, 2024 6:22 pm

Cracking project. Thanks for sharing and looking forward to the next update

Stephen400
Posts: 11
Joined: Sun Oct 08, 2023 9:41 pm

Re: R1200S DOHC Project

Postby Stephen400 » Tue Jan 23, 2024 7:39 pm

dark_knight87 wrote:Just a quick question? - will you be using the R1200 wiring loom or do you need to use the R9T's one?


Im sticking with the R12 loom as theres very little changing electronics wise. The coils, injectors, lambdas, Crank pos etc are all the same. Even the newer style gear position sensor works with the S's bmsk and dash.

The only difference (so far at least) is that the Cam position sensor is different. A 3 wire hall sensor on the 9T and a magnetic 2 wire sensor on the S.

So the 9T sensor will not work with S bmsk and the S sensor will not fit in the 9T engine! Coincidentally, the 2010-12 dohc engines use a 2 wire sensor that fits in the 9t engine! I also had to replace the 'Reluctor ring' which is just a pickup on a washer, about £5 from BM. :D

I will be completely re-taping the wiring loom as its looking very crusty!

f90x wrote:I think that was 'Humbug'. Well known here. I loved my S and owned it 11yrs. I always thought a twin cam version would be superb. Are you going to tweak the motor to get the 120hp of the 'twin spark'


Humbug... A fitting name!

I had a dyno run before the teardown, just for my own interest/records. It ran 108rwhp. Not bad at all considering the mileage!

I am interested to see how much the twin cam kicks out with the standard S ecu.

The main goal for now is get it running and see how it performs. Then a remap or Rapidbike evo.

I have also been researching a 1300cc big bore kit for the future... Not that its needed. 100bhp is plenty enough for a big twin to tear up the dales! :)

User avatar
f90x
Member
Posts: 2773
Joined: Mon Jul 16, 2007 5:38 pm
Location: norf lundun

Re: R1200S DOHC Project

Postby f90x » Tue Jan 23, 2024 9:53 pm

Yeah, a 1300 big bore would be interesting but not necessary. Looking forward to the outcome.
R1200GS TC. Triple Black
R1200S. It’s gone. Had it 11yrs. My favourite bike in 42yrs riding.

Holdsworth professional
Motobecane C3
Brompton

User avatar
popsky
Member
Posts: 1849
Joined: Tue Apr 21, 2009 5:09 pm
Location: Minehead Somerset

Re: R1200S DOHC Project

Postby popsky » Tue Jan 23, 2024 10:41 pm

Looks superb now and it’s still in bits, looking forward to the project progressing. The bike possibly belonged to Sandbar who used to sell ilmberger carbon (I may be wrong though)
Phil.

R1200S and loving it !

Hoch Bergstraßenjäger…………………………………

Stephen400
Posts: 11
Joined: Sun Oct 08, 2023 9:41 pm

Re: R1200S DOHC Project

Postby Stephen400 » Tue Jan 23, 2024 11:21 pm

While I was waiting for the powder coating I started on the headlight.

I'm aiming for an LED halo type light, as you see on every new vehicle at the moment... But I like 'em.
I removed the front 'glass' (thats a nightmare of a job :x )

Here is the before:

IMG_9004 Large.jpeg
IMG_9004 Large.jpeg (278.1 KiB) Viewed 1519 times


I painted the silver edging in satin black, I don't think it makes any difference to headlight output. Black certainly looks sleek compared to silver.

After several evenings designing, revising and printing different variations I came up with what I think looks very smart:

IMG_9022 Large.jpeg
IMG_9022 Large.jpeg (175.83 KiB) Viewed 1519 times


The whole thing is 3D printed and uses a cob led strip and an led pilot bulb.

Im happy with the design but I still have to work on the wiring. I want it to fade on with ignition and fade out a few seconds after ignition is turned off.

I also want to make the low beam auto switch off with daylight. The drl would be wasted if the headlight was glaring away :lol:

IMG_8864 Large.jpeg
IMG_8864 Large.jpeg (613.1 KiB) Viewed 1519 times

IMG_8866 Large.jpeg
IMG_8866 Large.jpeg (523.36 KiB) Viewed 1519 times


This was the beginning of assembly. Everything purple is powder coated. The front framework and front spring are powder coated black.

In an attempt to save a few quid I stripped and painted the fork bottoms and bottom yoke.

The suspension is currently Ohlins rear and hagon front. The bike came with the Ohlins front but it is damaged beyond economical repair. I had the rear serviced but it needs some components replacing to do the job right. I think for the money I'll go for a matched pair of nitron or yss or something else. Ohlins was a nice factory option but a lot of money to replace with new.

They're staying as is for this year.

I do love the combo of purple and yellow so I ordered a brake hose in yellow and purple. The yellow isnt a great match but it has grown on me.

IMG_8932 Large.jpeg
IMG_8932 Large.jpeg (319.2 KiB) Viewed 1519 times


Here is the bike as it currently stands

IMG_9130 Large.jpeg
IMG_9130 Large.jpeg (632.35 KiB) Viewed 1519 times


Im using the R12S throttle bodies as they're a larger diameter. They were beyond cleaning so I stripped them completely and sent them for powder coating along with the last few bits.
Last edited by Stephen400 on Thu Jan 25, 2024 8:17 pm, edited 1 time in total.

Humbug
Member
Posts: 637
Joined: Wed Oct 28, 2015 6:06 pm
Location: Nottinghamshire

Re: R1200S DOHC Project

Postby Humbug » Thu Jan 25, 2024 7:18 pm

Twas mine for 90,000 of those miles. Not painted by me I will add, although it stood out from the normal colours which did nothing for me anyway. Each to their own though. The Hagon replaced the front Ohlins which itself was damaged beyond repair when the bottom mount split clear in half. The rear had been rebuilt with new parts 10,000 miles prior to selling it, they are a bit prone to damage. Over the years, a few parts were changed, oil cooler, rear shaft, rear bevel box rebuilt, rear wheel to name but a few but the bike was ridden hard and fast both at Cadwell, Donington and across Europe a couple of times.
Nice to see it getting a new life.
10 KTM RC8

Stephen400
Posts: 11
Joined: Sun Oct 08, 2023 9:41 pm

Re: R1200S DOHC Project

Postby Stephen400 » Thu Jan 25, 2024 8:24 pm

Humbug wrote:Twas mine for 90,000 of those miles. Not painted by me I will add, although it stood out from the normal colours which did nothing for me anyway. Each to their own though. The Hagon replaced the front Ohlins which itself was damaged beyond repair when the bottom mount split clear in half. The rear had been rebuilt with new parts 10,000 miles prior to selling it, they are a bit prone to damage. Over the years, a few parts were changed, oil cooler, rear shaft, rear bevel box rebuilt, rear wheel to name but a few but the bike was ridden hard and fast both at Cadwell, Donington and across Europe a couple of times.
Nice to see it getting a new life.


Fantastic.

Quite a feat to hit those miles on an S. Theres no chance of me managing that :lol:

Stephen400
Posts: 11
Joined: Sun Oct 08, 2023 9:41 pm

Re: R1200S DOHC Project

Postby Stephen400 » Fri Feb 09, 2024 8:27 pm

Not much of an update here...

Been waiting for Powder Coating for the last week.

Had a snow day yesterday (yes. like a child) so i had time to play with my 3d scanner. The DOHC engine has plastic covers below each cylinder to cover the secondary coil and wires. BMW want £25 a side! So after several hours scanning and printing I have a prototype that fits. Im thinking these might look good in Ohlins yellow? (its grey as its a prototype)

IMG_9241 Large.jpeg
IMG_9241 Large.jpeg (255.51 KiB) Viewed 926 times


I've just collected the latest batch of powdercoating.

IMG_9232 Large.jpeg
IMG_9232 Large.jpeg (616.81 KiB) Viewed 926 times


Front calipers in a slightly textured black.

IMG_9230 Large.jpeg
IMG_9230 Large.jpeg (664.18 KiB) Viewed 926 times


Throttle bodies, levers and end weights all in Illusion purple.

Got a bit of work rebuilding calipers (when the stainless bolts arrive) and reassembling the throttles...

Humbug
Member
Posts: 637
Joined: Wed Oct 28, 2015 6:06 pm
Location: Nottinghamshire

Re: R1200S DOHC Project

Postby Humbug » Sun Feb 11, 2024 11:11 am

Wow, and black and white was the worst part in your opinion! :D
10 KTM RC8

Stephen400
Posts: 11
Joined: Sun Oct 08, 2023 9:41 pm

Re: R1200S DOHC Project

Postby Stephen400 » Sun Feb 11, 2024 3:19 pm

Humbug wrote:Wow, and black and white was the worst part in your opinion! :D

:lol:

IMG_9253 Large.jpeg
IMG_9253 Large.jpeg (346.61 KiB) Viewed 848 times
IMG_9254 Large.jpeg
IMG_9254 Large.jpeg (378.78 KiB) Viewed 848 times


Too Jazzy? :D



The way my budget is looking the black and white fairings might have to go back on :lol:

Humbug
Member
Posts: 637
Joined: Wed Oct 28, 2015 6:06 pm
Location: Nottinghamshire

Re: R1200S DOHC Project

Postby Humbug » Mon Feb 12, 2024 8:18 pm

Too jazzy for me but that's why I love the bike world, individuality. If you like it, it's good with me.
10 KTM RC8


Return to “Boxerspex”

Who is online

Users browsing this forum: No registered users and 14 guests