...swiss alpenchallenge bike

This is the forum for current/former/aspiring 'S owners to discuss their other two wheeled choices.

Moderators: Gromit, Paul, slparry

User avatar
Paul
Wanna buy a sticker mister?
Posts: 2858
Joined: Mon Feb 16, 2004 8:44 pm
Location: Boxertrix Towers, Norfolk
Contact:

...swiss alpenchallenge bike

Postby Paul » Sun Aug 23, 2015 10:20 am

Time for an extra bike in the garage...

Image

Just took it out for a test run, but the motor seems a little asthmatic and underpowered. The salesman assured me it would loosen up and develop more power with prolonged use...

Seriously though, I've had a couple of colleagues at work suffer serious health issues of late, and taking a long hard look at my personal fitness and health levels, I decided it's time to take action and get a lot fitter and lighter. I am enrolled in the Pru Health "Vitality" health insurance scheme at work, and they will subsidise the cost of the bike quite significantly, so why not?

I have an old Trek Mountain bike which has not seen much active use since my son's was stolen, so that can go on Gumtree. I just did my old fitness circuit up to Hampton Court Palace, and along the river to Kingston Bridge and back, and I did a similar time on the new BMC as I used to do on my Trek when I was a tad fitter, so the BMC is clearly a better road bike for me.

I am however determined not to be a MAMIL*, so will be using my baggy mountain bike trousers when out and about.

Cheers,

Paul

*MAMIL: Middle Aged Man In Lycra
You really need only two tools: WD-40 and duct tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the tape.

User avatar
slparry
Moderator
Posts: 6589
Joined: Sat Sep 20, 2008 7:19 pm
Location: Wrexham
Contact:

Postby slparry » Sun Aug 23, 2015 3:46 pm

Paul, I'm confused, I've spent 5 minutes looking at the pic and despite zooming in I'm still struggling to see where they've hidden the engine ;)
--
Steve Parry


Current fleet: '14 F800GS, '87 R80RS, '03 R1100S BoxerCup, '15 R1200RT LE Dynamic, '90 K1

dave the german
Member
Posts: 3614
Joined: Tue Nov 01, 2005 4:35 am
Location: North East

Postby dave the german » Sun Aug 23, 2015 3:55 pm

Steve, if you look to the left it's next to a triumph
'15 R1200GS TE
'06 R1200S
'04 BCR
Yam SR 500 long term restoration
wanna win the lottery and ride my bike

SP250
Posts: 982
Joined: Mon Sep 09, 2013 2:01 pm
Location: Shropshire

Postby SP250 » Sun Aug 23, 2015 4:26 pm

Paul

Bit of a come-down after you decided you needed an R1200S in the garage and gave me grief for buying Andy's from under your nose!

Getting serious ready for next year's Flash tour are we?

Cheers John
John M

User avatar
Blackal
Posts: 8241
Joined: Fri Jul 29, 2005 7:53 pm

Postby Blackal » Sun Aug 23, 2015 4:46 pm

Never understood why everyone pays for the lightest bike possible - when trying to get fit.............

Surely that's like weightlifters using boxes of polystyrene for weight-training? :?

I have a pushbike too - I just need to:

Get it fettled
Get on it
Get going.

Next year........... :oops:

Al
If I am ever on life support - Unplug me......
Then plug me back in..........

See if that works .....
:?

User avatar
Paul
Wanna buy a sticker mister?
Posts: 2858
Joined: Mon Feb 16, 2004 8:44 pm
Location: Boxertrix Towers, Norfolk
Contact:

Postby Paul » Sun Aug 23, 2015 5:34 pm

slparry wrote:Paul, I'm confused, I've spent 5 minutes looking at the pic and despite zooming in I'm still struggling to see where they've hidden the engine ;)


Steve,

It's a removable unit, which sits on the saddle.
You really need only two tools: WD-40 and duct tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the tape.

User avatar
Paul
Wanna buy a sticker mister?
Posts: 2858
Joined: Mon Feb 16, 2004 8:44 pm
Location: Boxertrix Towers, Norfolk
Contact:

Postby Paul » Sun Aug 23, 2015 5:36 pm

SP250 wrote:Paul

Bit of a come-down after you decided you needed an R1200S in the garage and gave me grief for buying Andy's from under your nose!

Getting serious ready for next year's Flash tour are we?

Cheers John


Watch this space... Exciting developments will be revealed in the fullness of time ;-)

Have you splashed down your deposit for Flash 2016 yet?

Cheers,

Paul
You really need only two tools: WD-40 and duct tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the tape.

User avatar
Paul
Wanna buy a sticker mister?
Posts: 2858
Joined: Mon Feb 16, 2004 8:44 pm
Location: Boxertrix Towers, Norfolk
Contact:

Postby Paul » Sun Aug 23, 2015 5:42 pm

Blackal wrote:Never understood why everyone pays for the lightest bike possible - when trying to get fit.............

Surely that's like weightlifters using boxes of polystyrene for weight-training? :?

I have a pushbike too - I just need to:

Get it fettled
Get on it
Get going.

Next year........... :oops:

Al


Let's have less of that talking sense... That's not what we come to this web site for.

Paul
You really need only two tools: WD-40 and duct tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the tape.

User avatar
Blackal
Posts: 8241
Joined: Fri Jul 29, 2005 7:53 pm

Postby Blackal » Sun Aug 23, 2015 6:08 pm

Paul wrote:
slparry wrote:Paul, I'm confused, I've spent 5 minutes looking at the pic and despite zooming in I'm still struggling to see where they've hidden the engine ;)


Steve,

It's a removable unit, which sits on the saddle.


Is it firing on all cylinders?.................... :?

On a serious-er note - I'm hoping to enjoy pushbiking from next year on - but not like Stoney - just to enjoy fresh air, scenery and exercise. :oops:

Al :wink:
If I am ever on life support - Unplug me......
Then plug me back in..........

See if that works .....
:?

User avatar
slparry
Moderator
Posts: 6589
Joined: Sat Sep 20, 2008 7:19 pm
Location: Wrexham
Contact:

Postby slparry » Sun Aug 23, 2015 6:27 pm

Blackal wrote:
Paul wrote:
slparry wrote:Paul, I'm confused, I've spent 5 minutes looking at the pic and despite zooming in I'm still struggling to see where they've hidden the engine ;)


Steve,

It's a removable unit, which sits on the saddle.


Is it firing on all cylinders?.................... :?

<snip>quote]

LOL
--
Steve Parry


Current fleet: '14 F800GS, '87 R80RS, '03 R1100S BoxerCup, '15 R1200RT LE Dynamic, '90 K1

User avatar
nab 301
Member
Posts: 2374
Joined: Sat Dec 04, 2004 6:41 pm
Location: Dublin Ireland

Postby nab 301 » Tue Aug 25, 2015 8:33 pm

Did the jig slip when they were welding on the crossbar :wink:
_________________
Nigel

Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..

User avatar
Blackal
Posts: 8241
Joined: Fri Jul 29, 2005 7:53 pm

Postby Blackal » Tue Aug 25, 2015 8:54 pm

nab 301 wrote:Did the jig slip when they were welding on the crossbar :wink:


It's level - on the gents' model............. :wink:

Al [smilie=sofa.gif]
If I am ever on life support - Unplug me......
Then plug me back in..........

See if that works .....
:?

User avatar
bigblackfalco
Posts: 1921
Joined: Wed Feb 18, 2004 10:05 am
Location: Darkest Aberdeenshire

Postby bigblackfalco » Tue Aug 25, 2015 9:42 pm

Is it any good for making bacon buttys??
Honda VFR750 FV 1997 Red and dirty, 130K miles.

Honda VFR800 Xf Crossrunner 2016 White and dirty, 120K miles.

User avatar
Paul
Wanna buy a sticker mister?
Posts: 2858
Joined: Mon Feb 16, 2004 8:44 pm
Location: Boxertrix Towers, Norfolk
Contact:

Postby Paul » Tue Aug 25, 2015 10:25 pm

you guys... :roll:
You really need only two tools: WD-40 and duct tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the tape.


Return to “My other bike's a...”

Who is online

Users browsing this forum: No registered users and 1 guest