Planes,bikes, boats and automobiles

Done a "Ewan & Charley"? Been for a fried breakfast and taken pictures? Share the tales of your adventure in here

Moderators: Gromit, Paul, slparry

User avatar
Boxermed69
Member
Posts: 1282
Joined: Fri Apr 08, 2011 11:28 am
Location: Costa del Weymouth

Planes,bikes, boats and automobiles

Postby Boxermed69 » Mon Apr 27, 2015 10:14 pm

Still haven't got around to writing up last year's european jaunt :oops:

...but I'm off my lazy arse to relate last Thursday's adventure. Apologies in advance for the lack of pics; (a) it didn't occur until I was halfway home, and (b) I was on a bit of a mission to get home.

I was off last week until Friday night. The plan was hatched and the logistics sorted between Monday and Wednesday.

Up at 0400hrs on Thursday. On the road at 0430, courtesy of 'dad cab', for the 70 mile drive to Bristol Airport. We were a bit early - what a difference travelling on the A37 at that hour makes!

The best airport experience to date was had: no queue for luggage check-in or security. Twas almost a pleasure. The Ryanair flight to Dublin landed on time at 0905hrs.

The luck held as everyone queued for immigration checks. No-one seemed to want to use the 'fast lane' DIY facilities for those with 'chip' passports, despite encouragement from airport staff. I didn't need a second invite - straight through, no bother, as they all queued on...

As I arrived at the conveyor in the luggage hall (I was first there) the belt started....and my bag was the first out! Surely I'll be paying for this later...?

Mine host, Tony, was waiting in Arrivals. He drove us the 35 minutes to his place in Celbridge, a few miles west of Dublin.

Saw bike - liked bike - studied paperwork - bought bike :D

Spent the next hour drinking tea and struggling to book a ferry online and arrange insurance over the phone. I'd already sorted the cover and just needed to activate it. The VIN number was required as the bike's Irish registered. The biggest problem was trying to figure out what std code prefix to use - the usual Eire to NI code didn't work. Got there in the end.

Luggage packed, suited and booted, headed off back to Dublin with Tony's suggested route in mind. Sod the ring road to Dublin Port. Good call. I rode through the centre of the city alongside the Liffey. Proper picturesque :)

Got the 1515hrs Stenaline ferry to Holyhead. Again, one of the first on board (only one other motorbike on the boat). I was settled in my comfy lounge chair while cars were still queueing to load :wink:

Only managed to snatch about half an hour's kip during the 3.5hr crossing (special thanks to the Chinese extended family nearby who must've shared a bargain bucket of amphetamine :evil: ).

The Irish Sea was like the proverbial mill pond and folk were sunbathing on the starboard deck. It were reet nice as I watched countless large jellyfish rotating as they floated past just a few inches under the water's surface.

Disembarked at 1855hrs. Pulled over in Holyhead to add a warm layer and change visors. Got underway at 1920. A55 to Bangor, then onto the A5 towards Betws-Y-Coed. That ride through Snowdonia with almost zero traffic and the crimson sun behind me is one I'll cherish the memory of. I started to click with the bike and made smooth and fairly rapid progress across North Wales.

Trundled past the WPH at about 2030hrs. Sure I glimpsed a solitary blue/white bike outside - that you Steve P.? So, I lied - I DID get to Llangollen this year, but unfortunately a day early :(

Onward to Shrewsbury. Was almost at Telford and the M54 before it was completely dark. It was my plan to try to hit the motorways by night fall.

I won't lie, the M54, M6 and M5 were no fun at all, but a means to an end. Unsurprisingly I was feeling increasingly tired and it was becoming decidedly nippy - those heated grips were a boon :). For safety I decided to stop every hour after 2100 to stretch the legs and inject caffeine.

Finally hit the A358 at Taunton at almost 0100hrs Made my second and last fuel stop on the A303 at Ilminster before the final leg home. Coasted onto the drive at 0156hrs.

Yep, a long old day but one I don't regret cos I'm now the proud owner of...

Image



:D

Very clean on an 08 plate with 27K miles, sport pack, a FMDSH and a few choice nick nacks. Now I've got to sort the UK registration. Will need a mph speedo first mind... 8). Oh yes, those GS pot protectors will have to go too :pukeright:

Mike
Horizontally opposed, vertically challenged...
Image

User avatar
slparry
Moderator
Posts: 6597
Joined: Sat Sep 20, 2008 7:19 pm
Location: Wrexham
Contact:

Postby slparry » Mon Apr 27, 2015 10:29 pm

nice :)
--
Steve Parry


Current fleet: '14 F800GS, '87 R80RS, '03 R1100S BoxerCup, '15 R1200RT LE Dynamic, '90 K1

Mitch1100
Member
Posts: 995
Joined: Tue Apr 23, 2013 9:00 am
Location: Tasmania

Postby Mitch1100 » Mon Apr 27, 2015 10:32 pm

Very noice in yellow..protectors look fine! Friend has just spent $300aud replacing scratched head cover on his RT after simple topple...now has protectors :wink:
2009 HP2 Sport...sold
2006 R1200s with yellow rim tape
2008 Ducati Monster S4RS Tricolore..sold
2004 R1100s BoxerCup Replika..sold
2006 Subaru WRX STI S204 #318/600

User avatar
popsky
Member
Posts: 1855
Joined: Tue Apr 21, 2009 5:09 pm
Location: Minehead Somerset

Postby popsky » Tue Apr 28, 2015 9:52 am

When I started reading and you were on a plane going to Ireland I thought he's off into cloud cuckoo land :lol: then I got to the…

Saw bike - liked bike - studied paperwork - bought bike :D

Very nice Mike, I know you were interested in Roloo's but didn't realise you were so close to purchase 8)

Now all you need is a nice trip to Jedburgh to make sure everything is working as it should.
Phil.

R1200S and loving it !

Hoch Bergstraßenjäger…………………………………

dave the german
Member
Posts: 3619
Joined: Tue Nov 01, 2005 4:35 am
Location: North East

Postby dave the german » Tue Apr 28, 2015 1:23 pm

Nice!! It appears to have all the right nick nacks too
'15 R1200GS TE
'06 R1200S
'04 BCR
Yam SR 500 long term restoration
wanna win the lottery and ride my bike

Hayden
Member
Posts: 767
Joined: Tue Mar 04, 2008 12:10 pm
Location: Birmingham

Postby Hayden » Tue Apr 28, 2015 1:28 pm

Lovelly looking bike, great in that colour, long day but well worth it.
congrats

Steve :thumbleft:

User avatar
Boxermed69
Member
Posts: 1282
Joined: Fri Apr 08, 2011 11:28 am
Location: Costa del Weymouth

Postby Boxermed69 » Tue Apr 28, 2015 3:02 pm

If I can get it UK registered in time Jedburgh is a distinct possibility,but I shan't go trying to book accommodation until then.

Mike :)
Horizontally opposed, vertically challenged...
Image

User avatar
nab 301
Member
Posts: 2374
Joined: Sat Dec 04, 2004 6:41 pm
Location: Dublin Ireland

Postby nab 301 » Tue Apr 28, 2015 8:19 pm

Very nice , if I'd known, I could have .... bought you a cup of tea :lol:
_________________
Nigel

Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..

andy griff
Member
Posts: 648
Joined: Sun Oct 05, 2008 8:20 pm
Location: England
Contact:

Postby andy griff » Tue Apr 28, 2015 9:06 pm

Very nice,

Yellow being the best colour and all !

dave the german
Member
Posts: 3619
Joined: Tue Nov 01, 2005 4:35 am
Location: North East

Postby dave the german » Wed Apr 29, 2015 4:34 am

needs some stickers :wink:
'15 R1200GS TE

'06 R1200S

'04 BCR

Yam SR 500 long term restoration

wanna win the lottery and ride my bike

User avatar
Boxermed69
Member
Posts: 1282
Joined: Fri Apr 08, 2011 11:28 am
Location: Costa del Weymouth

Postby Boxermed69 » Wed Apr 29, 2015 11:38 am

Hmmm, needs a few more 'nick nacks' (ooh, I am a sucker for a bitta carbon) and, yes Dave, some special stickers :wink:

While I have the floor: have sorted out the required EC Certificate of Conformity for registration purposes. There are various 'expert' services advertising online offering to procure your CofC, costing from £40 to 140 Euros! I phoned BMW UK - one email later the document's on it's way...FOC :D

Mike :)
Horizontally opposed, vertically challenged...
Image

User avatar
popsky
Member
Posts: 1855
Joined: Tue Apr 21, 2009 5:09 pm
Location: Minehead Somerset

Postby popsky » Wed Apr 29, 2015 12:32 pm

Boxermed69 wrote:Hmmm, needs a few more 'nick nacks' (ooh, I am a sucker for a bitta carbon) and, yes Dave, some special stickers :wink:

While I have the floor: have sorted out the required EC Certificate of Conformity for registration purposes. There are various 'expert' services advertising online offering to procure your CofC, costing from £40 to 140 Euros! I phoned BMW UK - one email later the document's on it's way...FOC :D

Mike :)


Do you need new clocks Mike, it seems you can't change the odometer from Km to miles, my local service manager seemed to think you could fiddle with button configs to alter but I couldn't do it, (was trying in case someone bought Roloo's), there's nothing I could see in the owners or workshop manual, as a stop gap you could just change the face plate, a link's been on this board before but can't remember under which heading,
Phil.

R1200S and loving it !

Hoch Bergstraßenjäger…………………………………

User avatar
Topcat
Member
Posts: 562
Joined: Thu Aug 25, 2005 2:22 pm
Location: Somerset

Postby Topcat » Wed Apr 29, 2015 4:03 pm

Lovely bike, hope you enjoy it.

Do you need to change the clock to miles? Daughters Kymco has a km clock and has no bother with mot's etc? We just put a few neat stickers to mark 30, 50 and 60mph positions.

My R12's speedo is way off anyway, indicated 50 is about 43, 44, and 100 is approx 90, on the track of course, cough cough.

User avatar
Boxermed69
Member
Posts: 1282
Joined: Fri Apr 08, 2011 11:28 am
Location: Costa del Weymouth

Postby Boxermed69 » Wed Apr 29, 2015 5:00 pm

TC and Phil,

I'm working on the speedo problem now. I did do a bit of research before going to Ireland. Firstly, a new instrument assembly (as you know it's all in one) would cost £635 from a UK main dealer :shock: . Well, obviously that ain't gonna happen :) . There's a firm in Das Vaterland called Heiler Tachodesign who'll knock up an OE spec (or whatever spec you want) speedometer face for 75 Euros. I've also been in contact with Peter Bond who's a bike instrument specialist in the UK. Though he majors on refurbing/remanufacturing stuff for classic bikes he does also dabble with modern kit and comes highly recommended. His concern is that BMW may have bonded the needle onto the shaft such that, when you try to remove it, you end up pulling the guts out of the delicate coil assembly within, ergo one scrap speedo :? He'll charge £180 for the whole job including making the new speedo face if successful. If not, it'll be £35 and I'll get my broken instruments back :D. The way I see it, he's the best bloke for the job - I'm certainly not going to mess with it, and I've only got £35 to lose.

I'm assured that the odometer and trip meters can be changed to read in miles, but it requires the wizz-bang machine at a MD to be plugged in (ker ching! :roll: ).

Unfortunately the good ol' DVLA require proof that a mph conversion is 'proper'. They specifically state that the mph scale must be under the protective perspex and not just a sticker on top. By proof they mean a pukka receipt for new parts or work done and/or photographs. If they're not satisfied with the evidence they can send you to a VOSA test centre to have it examined (ker ching! :roll: )

So, will be looking to send the instruments to Peter Bond tomorrow. Fingers crossed... :?

Mike
Horizontally opposed, vertically challenged...
Image

User avatar
popsky
Member
Posts: 1855
Joined: Tue Apr 21, 2009 5:09 pm
Location: Minehead Somerset

Postby popsky » Wed Apr 29, 2015 5:08 pm

Are you a customer of CW? If so give them a call re changing the odometer to miles,

Have a look at ukgs'ers forum there may be some help in there
Phil.

R1200S and loving it !

Hoch Bergstraßenjäger…………………………………


Return to “Ride Reports”

Who is online

Users browsing this forum: No registered users and 8 guests