Belly pan - keep centre and side stand

Area for traders to advertise.

Moderators: Gromit, Paul, slparry

User avatar
beachcomber
Posts: 193
Joined: Tue Mar 17, 2015 6:10 pm
Location: Redditch UK and Reichenau Saxony
Contact:

Belly pan - keep centre and side stand

Postby beachcomber » Sat May 16, 2015 3:47 pm

Any likely interest ??

I'm developing a belly pan for our own project which will have a cooling air intake [ x 2 ] at the front AND will allow the retention of both side and main stand ......... any interest ?

We're also looking at some heat protection material to protect paintwork from exhaust heat transfer.

I'll flag up some pix next week when the moulds are completed.

BTW - they will be GRP and will come in any colour as long as it's Black.
"if at first you don't succeed - you've already been a failure once"

bfisher
Posts: 224
Joined: Mon Jan 12, 2015 10:37 pm
Location: SW London

Postby bfisher » Tue Jun 30, 2015 9:10 pm

Any pictures TJ?

User avatar
beachcomber
Posts: 193
Joined: Tue Mar 17, 2015 6:10 pm
Location: Redditch UK and Reichenau Saxony
Contact:

Postby beachcomber » Wed Jul 01, 2015 9:17 am

bfisher wrote:Any pictures TJ?


THE MOULDS ARE NOW COMPLETE [ caps lock off now !], we're finalising the air intakes / grills and the fittings to the front cover, brackets / fixings at the rear.

Pix up as soon as.
"if at first you don't succeed - you've already been a failure once"

Henners
Posts: 127
Joined: Sat Aug 15, 2015 4:27 pm

Postby Henners » Fri Aug 21, 2015 3:04 pm

Any more news on this?

User avatar
beachcomber
Posts: 193
Joined: Tue Mar 17, 2015 6:10 pm
Location: Redditch UK and Reichenau Saxony
Contact:

Postby beachcomber » Thu Sep 03, 2015 8:16 am

Henners wrote:Any more news on this?


Hi

been away for a couple of weeks chill break in Saxony - back now. Moulds are completed and I will have pix up asap
"if at first you don't succeed - you've already been a failure once"

Henners
Posts: 127
Joined: Sat Aug 15, 2015 4:27 pm

Postby Henners » Thu Sep 03, 2015 6:24 pm

beachcomber wrote:
Henners wrote:Any more news on this?


Hi

been away for a couple of weeks chill break in Saxony - back now. Moulds are completed and I will have pix up asap


Excellent ~ very interested ~ H

User avatar
beachcomber
Posts: 193
Joined: Tue Mar 17, 2015 6:10 pm
Location: Redditch UK and Reichenau Saxony
Contact:

Postby beachcomber » Sat Sep 05, 2015 8:08 pm

Production moulds now completed - holes / vents optional !!!

Yes, retains both stand and comes with a full [ and foolproof ] fitting kit.

Details over in "Vendors" soon. Don't forget your 10% discount.

Image

Image
"if at first you don't succeed - you've already been a failure once"

Mitch1100
Member
Posts: 995
Joined: Tue Apr 23, 2013 9:00 am
Location: Tasmania

Postby Mitch1100 » Sun Sep 06, 2015 12:29 am

Is that your own rear hugger?
2009 HP2 Sport...sold
2006 R1200s with yellow rim tape
2008 Ducati Monster S4RS Tricolore..sold
2004 R1100s BoxerCup Replika..sold
2006 Subaru WRX STI S204 #318/600

User avatar
beachcomber
Posts: 193
Joined: Tue Mar 17, 2015 6:10 pm
Location: Redditch UK and Reichenau Saxony
Contact:

Postby beachcomber » Sun Sep 06, 2015 10:38 am

Mitch1100 wrote:Is that your own rear hugger?


Yes, however we are not happy with the current attachment, and there will also be some other subtle changes to protect the innocent. :wink:

A couple of weeks should see the new hardware back at the farm and the new moulds completed.
"if at first you don't succeed - you've already been a failure once"


Return to “Trade Section”

Who is online

Users browsing this forum: No registered users and 22 guests