Y Pipe / chip - any interest ?

Area for traders to advertise.

Moderators: Paul, slparry, Gromit

Scotland
roadburner
Posts: 187
Joined: Mon May 18, 2015 4:02 pm
Location: Cumbria England

Postby roadburner » Sat Sep 05, 2015 9:50 pm

Let me know what the spec of the chip is when they arrive, i was just about to order one from GS john, as i've seen some good reports on those, but i'll hang fire until you get yours sorted.

User avatar England
beachcomber
Posts: 193
Joined: Tue Mar 17, 2015 6:10 pm
Location: Redditch UK and Reichenau Saxony
Contact:

Postby beachcomber » Sun Sep 06, 2015 10:48 am

roadburner wrote:Let me know what the spec of the chip is when they arrive, i was just about to order one from GS john, as i've seen some good reports on those, but i'll hang fire until you get yours sorted.


RB - we've put together a deal with a major US manufacturer who has produced a unit to suit the Y Pipe and open flow air filters.

This was NOT just a case of taking a stock unit off the shelf and putting it in a box. They were VERY co-operative, and the resultant deal will put us in the UK Agent's seat [ for ALL makes / models ].

We looked at several alternates, but these peeps were the only ones who actually DID what they said they would !

Naturally we want to test them out, but we've ordered a batch anyway [ confident in their abilities ] a - to get the deal and b. so we have initial stock for the UK market.

This will hopefully all arrive as and when the first Y Pipes [ RAMPIPES - why not ? ] become available.

As soon as the ink is dry on the contract and the first batch is on the way - I'll divulge the manufacturer - in the meantime ... you can all guess !! :lol:
"if at first you don't succeed - you've already been a failure once"

Scotland
roadburner
Posts: 187
Joined: Mon May 18, 2015 4:02 pm
Location: Cumbria England

Postby roadburner » Sun Sep 06, 2015 12:27 pm

Seeing as i have a Y pipe, and a power filter on my bike already I'm willing to test one out for you. And i wouldn't even charge you anything :D

User avatar England
beachcomber
Posts: 193
Joined: Tue Mar 17, 2015 6:10 pm
Location: Redditch UK and Reichenau Saxony
Contact:

Postby beachcomber » Wed Sep 16, 2015 1:25 pm

First few Y Pipes will be available in 2 week'a time, Finished in either "raw" satinised or polished [ stainless ].

If customs don't hold things up - the first batch of the chips should be here around the same time.

Belly pans also now ready.
"if at first you don't succeed - you've already been a failure once"

United States of America
pokeyhornet
Posts: 3
Joined: Mon Oct 10, 2016 4:57 pm
Location: Chicago

Postby pokeyhornet » Thu Oct 20, 2016 7:12 pm

Are these coming to you from the states? I'm interested, but would rather pay you and have it shipped to Chicago from the source than deal with postage from the UK.

New Zealand
tonys1100s
Posts: 21
Joined: Wed Dec 07, 2016 12:03 am
Location: New Zealand

Postby tonys1100s » Sat Dec 10, 2016 5:45 am

I might be interested....your first export order (new zealand😊)

Great Britain
victorlaszlo
Posts: 240
Joined: Sat Mar 26, 2016 1:48 pm
Location: London

Postby victorlaszlo » Tue Dec 13, 2016 1:31 pm

For R12S/R11S?

Great Britain
Humbug
Member
Posts: 348
Joined: Wed Oct 28, 2015 6:06 pm
Location: Nottinghamshire

Postby Humbug » Tue Dec 13, 2016 7:19 pm

Please god 12S

New Zealand
tonys1100s
Posts: 21
Joined: Wed Dec 07, 2016 12:03 am
Location: New Zealand

Postby tonys1100s » Tue Dec 13, 2016 7:57 pm

1100S, 1200's are rare and expensive down here!

User avatar South Africa
tanneman
Member
Posts: 1194
Joined: Wed Mar 04, 2009 8:26 pm
Location: Terra Firma

Postby tanneman » Sat Dec 17, 2016 5:57 pm

I have sorted the exhaust bit but will need a chip for the K&N air filter together with the lennies inlet duct and 2-1-2 exhaust.
'Let me check my concernometer.'

User avatar South Africa
tanneman
Member
Posts: 1194
Joined: Wed Mar 04, 2009 8:26 pm
Location: Terra Firma

Re: Y Pipe / chip - any interest ?

Postby tanneman » Sun Jan 01, 2017 8:18 am

This thread is not being updated. Time to look at alternatives.
'Let me check my concernometer.'

Scotland
McBoxer
Member
Posts: 475
Joined: Wed Jul 11, 2012 2:53 pm
Location: West Midlands

Re: Y Pipe / chip - any interest ?

Postby McBoxer » Sun Jan 01, 2017 7:10 pm

Haven't heard from Beachcomber for a while - hope everything is OK.
Big Scottish Al
____________
1982 BMW R65LS
1̶9̶9̶9̶ ̶B̶M̶W̶ ̶R̶1̶1̶0̶0̶S̶
1998 BMW Z3
2004 BMW X3

User avatar England
beachcomber
Posts: 193
Joined: Tue Mar 17, 2015 6:10 pm
Location: Redditch UK and Reichenau Saxony
Contact:

Re: Y Pipe / chip - any interest ?

Postby beachcomber » Tue Apr 04, 2017 8:29 am

Well ......... no actually, and thanx for your concern McB.

I have been suffering from a kidney issue [ CKD - Chronic Kidney Disease ] for some time now [ on and off for 6 years ] and it came to a peak during 2015 / 16 when it reached stage 3 [ of 5 ] - time to be concerned.

During the same period my pal at Realm also underwent serious health issues.

Some people of this parish are already aware of the situation, but as you might imagine the news was not typical forum material ! :wink:

So, where we at ??

Condition has stabilised for the past 6 months and even a slight improvement in the prognosis. :lol:

Both myself and AC are almost back to full steam now - and back to answer any queries.

Already we have resurrected the -10mm Telelever [ yet another personal disaster for our welder ! ] and we have decided to offer the last remaining chips at the previous 2015 price. There is batch of 5 RAMLEVERs being completed as we speak. All now come blasted, checked visually and painted satin black. Available outright or exchange. ALL will also have the dampener mounting bracket .

The RAMSTRUTs [ adjustable rear strut ] are again available off the shelf as are RAMPOWER plug leads and of course RAMSHOX.

So apologies for the non-comms - probably self evident as to the reasons why.
"if at first you don't succeed - you've already been a failure once"

Wales
andy griff
Member
Posts: 544
Joined: Sun Oct 05, 2008 8:20 pm
Location: England
Contact:

Re: Y Pipe / chip - any interest ?

Postby andy griff » Tue Apr 04, 2017 2:50 pm

Beachcomber

Sorry to hear about your problems, but great to read your positive message and can-do posts.
Good luck and keep going :D

User avatar England
beachcomber
Posts: 193
Joined: Tue Mar 17, 2015 6:10 pm
Location: Redditch UK and Reichenau Saxony
Contact:

Re: Y Pipe / chip - any interest ?

Postby beachcomber » Tue Apr 25, 2017 7:59 pm

andy griff wrote:Beachcomber

Sorry to hear about your problems, but great to read your positive message and can-do posts.
Good luck and keep going :D


Thanx for the kind thoughts Andy - appreciated

TJ
"if at first you don't succeed - you've already been a failure once"


Return to “Trade Section”

Who is online

Users browsing this forum: No registered users and 2 guests