www.boxertrix.com

Let me know what the spec of the chip is when they arrive, i was just about to order one from GS john, as i've seen some good reports on those, but i'll hang fire until you get yours sorted.

roadburner wrote:Let me know what the spec of the chip is when they arrive, i was just about to order one from GS john, as i've seen some good reports on those, but i'll hang fire until you get yours sorted.

RB - we've put together a deal with a major US manufacturer who has produced a unit to suit the Y Pipe and open flow air filters.

This was NOT just a case of taking a stock unit off the shelf and putting it in a box. They were VERY co-operative, and the resultant deal will put us in the UK Agent's seat [ for ALL makes / models ].

We looked at several alternates, but these peeps were the only ones who actually DID what they said they would !

Naturally we want to test them out, but we've ordered a batch anyway [ confident in their abilities ] a - to get the deal and b. so we have initial stock for the UK market.

This will hopefully all arrive as and when the first Y Pipes [ RAMPIPES - why not ? ] become available.

As soon as the ink is dry on the contract and the first batch is on the way - I'll divulge the manufacturer - in the meantime ... you can all guess !!

Seeing as i have a Y pipe, and a power filter on my bike already I'm willing to test one out for you. And i wouldn't even charge you anything

First few Y Pipes will be available in 2 week'a time, Finished in either "raw" satinised or polished [ stainless ].

If customs don't hold things up - the first batch of the chips should be here around the same time.

Belly pans also now ready.

Are these coming to you from the states? I'm interested, but would rather pay you and have it shipped to Chicago from the source than deal with postage from the UK.

I might be interested....your first export order (new zealand😊)

For R12S/R11S?

Please god 12S

1100S, 1200's are rare and expensive down here!

I have sorted the exhaust bit but will need a chip for the K&N air filter together with the lennies inlet duct and 2-1-2 exhaust.

This thread is not being updated. Time to look at alternatives.

Haven't heard from Beachcomber for a while - hope everything is OK.

Well ......... no actually, and thanx for your concern McB.

I have been suffering from a kidney issue [ CKD - Chronic Kidney Disease ] for some time now [ on and off for 6 years ] and it came to a peak during 2015 / 16 when it reached stage 3 [ of 5 ] - time to be concerned.

During the same period my pal at Realm also underwent serious health issues.

Some people of this parish are already aware of the situation, but as you might imagine the news was not typical forum material !

So, where we at ??

Condition has stabilised for the past 6 months and even a slight improvement in the prognosis.

Both myself and AC are almost back to full steam now - and back to answer any queries.

Already we have resurrected the -10mm Telelever [ yet another personal disaster for our welder ! ] and we have decided to offer the last remaining chips at the previous 2015 price. There is batch of 5 RAMLEVERs being completed as we speak. All now come blasted, checked visually and painted satin black. Available outright or exchange. ALL will also have the dampener mounting bracket .

The RAMSTRUTs [ adjustable rear strut ] are again available off the shelf as are RAMPOWER plug leads and of course RAMSHOX.

So apologies for the non-comms - probably self evident as to the reasons why.

Beachcomber

Sorry to hear about your problems, but great to read your positive message and can-do posts.
Good luck and keep going

andy griff wrote:Beachcomber

Sorry to hear about your problems, but great to read your positive message and can-do posts.
Good luck and keep going

Thanx for the kind thoughts Andy - appreciated

TJ