RAM - apologies for delays

Area for traders to advertise.

Moderators: Gromit, Paul, slparry

User avatar
beachcomber
Posts: 193
Joined: Tue Mar 17, 2015 6:10 pm
Location: Redditch UK and Reichenau Saxony
Contact:

RAM - apologies for delays

Postby beachcomber » Mon Aug 15, 2016 6:49 am

Just a headsup for peeps who have enquired about RAM products.

Their fabricator / GRP man has been off work for a length of time following a bad car accident. He's only just back and can only work 1/2 days as in reality he's not fixed yet !

That's meant a 2 month backlog on their production, and the priority at the moment is the C Type Replica chassis fabrication. They are trying to fit in other work along the way and will have at least 3 x -10mm RAMLEVERs out by next week and 5 x RAMSTRUTs.

GRP work will recommence asap after that.
"if at first you don't succeed - you've already been a failure once"

Neil178
Posts: 761
Joined: Sun Aug 29, 2004 11:24 pm
Location: East Mids

Re: RAM - apologies for delays

Postby Neil178 » Thu Feb 16, 2017 12:00 am

Hi TJ,
Glad you are on the mend.
I replied to your pm in December and it's been sat in your in box.
Cheers, Neil.

User avatar
beachcomber
Posts: 193
Joined: Tue Mar 17, 2015 6:10 pm
Location: Redditch UK and Reichenau Saxony
Contact:

Re: RAM - apologies for delays

Postby beachcomber » Tue Feb 21, 2017 9:25 am

Neil - sincere apple ogies. :oops: :oops:

I guess you've read of my health issues elsewhere, so won't repeat here.

Back on the mend now - double strike - AC has also had health issues during the same period - but again - on the mend.

That's one reason why Realm are having a clearout of existing stock to make way for 2017 and a new impetus. See trade section.

I've relayed your message to AC and you will be getting a contact soon.

PM sent

TJ
"if at first you don't succeed - you've already been a failure once"

User avatar
beachcomber
Posts: 193
Joined: Tue Mar 17, 2015 6:10 pm
Location: Redditch UK and Reichenau Saxony
Contact:

Re: RAM - apologies for delays

Postby beachcomber » Wed Mar 29, 2017 8:24 am

OK - Ramlevers now back on stream !!

New coded welder installed whilst the other guy is getting back to full strength.

The good news is that his first task is to make up a batch of 5 levers.

There are at least that number of people that are chasing these - so if you want your name on one just PM me and I'll let you have details for payment etc.

Also, if you want to do it on exchange.

We have 6 old units in stock - so the first 5 are being be made now. ALL will have the dampener bracket welded on. even if your exchange unit does not. Units ready for dispatch in April.

ATB

TJ
"if at first you don't succeed - you've already been a failure once"


Return to “Trade Section”

Who is online

Users browsing this forum: No registered users and 1 guest