K&N Oil Filters Failing

Pull up a chair - let's talk Boxerbollox

Moderators: Paul, slparry, Gromit

Scotland
Grip Fast
Posts: 684
Joined: Sat Jan 14, 2012 6:15 pm
Location: North Bucks

K&N Oil Filters Failing

Postby Grip Fast » Mon Nov 13, 2017 7:43 pm

Have you guys heard about the catastrophic failure of some K&N oil filters?

I ordered one for my other bike (Tiger 800) a couple of days ago, and received the email that it's on it's way about 5 minutes before reading a thread about folks who have had them fail and dump oil out. It seems that the nut that is brazed on for handy tightening/removal is the problem. The brazing may be damaging the can and after some time, the can springs a leak.

https://www.knfilters.com/mobile/recallkn204

Discussions on some forums would indicate that this problem goes beyond the those covered by the recall.

User avatar Great Britain
Boxered
Route Master
Posts: 3073
Joined: Sat Jun 26, 2004 4:44 pm
Location: Sintelinns

Re: K&N Oil Filters Failing

Postby Boxered » Mon Nov 13, 2017 8:38 pm

I've heard tales of that nut breaking clean off, leaving no way to remove the remnants of the filter on a R11S as the filter is recessed :shock:
One of the reasons that I always stick to OE consumables.

Steve
Well-weathered leather
Hot metal and oil
The scented country air
Sunlight on chrome
The blur of the landscape
Every nerve aware

User avatar
dark_knight87
Posts: 54
Joined: Fri Aug 07, 2009 7:34 am
Location: Rowley Regis - West Midlands

Re: K&N Oil Filters Failing

Postby dark_knight87 » Tue Nov 14, 2017 1:03 pm

I have used them on my R1150R for the last couple of years - on the R1150R the filter is recessed up into the motor so doesn't stick out of the bottom to get caught - as regard to the nut coming off - oil filters should only be tightened gently and not 'swung on', which I suspect is the issue with the accounts of them being an issue.

Just my opinion!

Regards,
Russ
It started badly, it tailed off a little in the middle and the less said about the end the better, but apart from that it was excellent.

Great Britain
boxerscott
Posts: 3210
Joined: Sat Apr 21, 2007 5:07 pm
Location: scottish borders
Contact:

Re: K&N Oil Filters Failing

Postby boxerscott » Tue Nov 14, 2017 1:46 pm

I agree with that. In the past on recessed filters I have had to secure the removal cap/tool with self tappers to get the blighter out. I do not buy k and n filters. Too expensive if you change filter every year regardless of mileage. (like lots of us do.)
I am the Village Green Preservation Society. God Bless Strawberry Jam and all it`s variety.


Return to “Boxerbanter”

Who is online

Users browsing this forum: No registered users and 13 guests