www.boxertrix.com

Posted: **Mon Sep 03, 2012 6:21 pm**

During the recent service at RGM Roy was unable to change the brake fluid on the RH caliper as the BMW Filling Valve (in place of a standard bleed nipple) had failed. Unfortunately he didn't have a spare so I figured it'd be a quick job to change.

After a call with Steve at Southport a bleed nipple arrived today but once I started to remove the BMW fill valve it was clear that the Bleed nipple supplied was not the correct thread. I reckon the once supplied was a 7mm thread (a 7mm AF spanner would go over it)?

So what is the thread on the Brembo caliper M8 x 1.25? Anyone know for definite so that I can get one ordered.

Posted: **Mon Sep 03, 2012 6:29 pm**

Or is it M10x1, like this one?

http://www.ebay.co.uk/itm/BMW-Ducati-Br ... 969wt_1271

Posted: **Mon Sep 03, 2012 8:05 pm**

Hi, just in case.............
I have a set of Speed bleeders that I got for my R1100S 2003 but never fitted.
I was sent two for the front SB7100S M7 X 1.0 and one for the back SB6100 M6 X 1.0
still unopened that you can have for £10 posted to the uk if they are any good to you.

Ned :wink:

Posted: **Mon Sep 03, 2012 8:32 pm**

Defo not that small a thread on the RH Brembo.

I have ordered an M10 nipple as pretty sure that is what it is......

Posted: **Tue Sep 04, 2012 7:08 pm**

10x 1mm on my original '99 brembo calipers.

Posted: **Tue Sep 04, 2012 7:52 pm**

Pleased for the confirmation on the size as I ordered one yesterday' so should hopefully be here tomorrow

www.boxertrix.com

Brembo Bleed Nipple Thread (MY 2000 R1100S)

Brembo Bleed Nipple Thread (MY 2000 R1100S)