BMW R1100S clutch or gearbox problem?

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: Gromit, Paul, slparry

Post Reply
User avatar
BlueBoxer
Posts: 283
Joined: Tue Jul 18, 2006 10:36 pm
Location: St Helens Merseyside

Postby BlueBoxer » Wed Jul 18, 2012 9:24 am

This looks to have happened to mine last night. Driving down m6 and I lost drive, thought it had jumped out of gear, nothing, no matter what gear I selected. Rolled to a stop on the hard shoulder. Strange rumbling from the gearbox. RAC had me home in 45 minutes.

I'll have a look tonight. Is this an economical repair on a slightly ratty r1100s?

Steve
FJR1300
R1100S
Top
User avatar
oyster
Posts: 1236
Joined: Fri Jul 02, 2004 1:03 pm
Location: retirementland kent

Postby oyster » Wed Jul 18, 2012 9:32 am

I did DIY on my gearbox, all new bearings and seals, not difficult if you know your way around engines/gearboxes. Long winded, single handed, strip down to get to the gearbox, but quite doable. I put in a new clutch and slave cylinder while I was there. Gearbox bearings + seals were about £60. Second hand gearbox, with unknown history, seem to be about £300.
Oyster. 1999 R1100S. Almost original.
Top
User avatar
BlueBoxer
Posts: 283
Joined: Tue Jul 18, 2006 10:36 pm
Location: St Helens Merseyside

Postby BlueBoxer » Wed Jul 18, 2012 7:58 pm

I could not face the time in the garage, I'm replacing the alternator on the fjr this evening.
It's going into http://www.rgm-uk.com/ next week.
I've used him before, he appears to know his stuff, has the kit, and I'll be confident I'll get sorted, and not end up rotting in the garage, as I'll never find the time to look at it.

Steve
FJR1300

R1100S
Top
User avatar
oyster
Posts: 1236
Joined: Fri Jul 02, 2004 1:03 pm
Location: retirementland kent

Postby oyster » Wed Jul 18, 2012 8:05 pm

Do let us know what was wrong and the cost to put it right - will be useful for the next victim.
Oyster. 1999 R1100S. Almost original.
Top
User avatar
bricking it
Member
Posts: 1026
Joined: Thu Jun 19, 2008 12:18 pm
Location: SW London

Postby bricking it » Wed Jul 18, 2012 9:37 pm

BlueBoxer wrote:This looks to have happened to mine last night. Driving down m6 and I lost drive, thought it had jumped out of gear, nothing, no matter what gear I selected. Rolled to a stop on the hard shoulder. Strange rumbling from the gearbox. RAC had me home in 45 minutes.

I'll have a look tonight. Is this an economical repair on a slightly ratty r1100s?

Steve


Is yours a 2001 model Steve ?
'53 R1100S, '56 KTM Super Duke
Top
User avatar
BlueBoxer
Posts: 283
Joined: Tue Jul 18, 2006 10:36 pm
Location: St Helens Merseyside

Postby BlueBoxer » Wed Jul 18, 2012 9:45 pm

It's a 2004 twinspark. Only lost a bulb up to now in the 40K I've put on it.

Steve
FJR1300

R1100S
Top
User avatar
BlueBoxer
Posts: 283
Joined: Tue Jul 18, 2006 10:36 pm
Location: St Helens Merseyside

Postby BlueBoxer » Fri Sep 07, 2012 7:06 pm

RGM fixed it.

9 hours labour @ £48 ph = £432
parts = £360

total = £792

Clutch plate.
Image
Shaft
Image

Trawling through the net it seems a common problem. It's half put me off the bike, and I won't be buying another BMW until I'm convinced they can put them together reliably. I can't be bothered changing it at the moment, but if this happens again, I'll get rid.

Steve
FJR1300

R1100S
Top
Post Reply

Return to “Boxertech”

Who is online

Users browsing this forum: No registered users and 57 guests