Anyone have any idea of the mileage lifespan of a Boxer clutch ?
OK I know there are factors such as type of usage, open roads, town etc. but in the past someone suggested to me that 60,000 miles is about the average life expectancy for a clutch on most shaft driven BMW's.
Is that right ?
Clutch life
Moderators: Gromit, Paul, slparry
Re: Clutch life
I have an 1150GS, 2001
I changed the clutch at about 150,000km (85,000miles) and it was only half worn.
I do a combination of short trips to work - about 15Km / 8Mi and longer trips, not less than 120miles, and when I can, the range of the fuel tank.
I am not aggressive on the clutch, cant do a mono to save my life and I dont do burn outs or the like.
Just like a car clutch, put it in gear with the brake on. If the clutch slips, its up for renewal.
I changed my clutch because I convinced myself it needed changeing, even though I did the stall test as I mention above.
I was going on a loooong trip (around the eastern part of Australia), away for 4 months and didn't want / need the hassel of doing away from home.
I changed the clutch at about 150,000km (85,000miles) and it was only half worn.
I do a combination of short trips to work - about 15Km / 8Mi and longer trips, not less than 120miles, and when I can, the range of the fuel tank.
I am not aggressive on the clutch, cant do a mono to save my life and I dont do burn outs or the like.
Just like a car clutch, put it in gear with the brake on. If the clutch slips, its up for renewal.
I changed my clutch because I convinced myself it needed changeing, even though I did the stall test as I mention above.
I was going on a loooong trip (around the eastern part of Australia), away for 4 months and didn't want / need the hassel of doing away from home.
Re: Clutch life
My brother Graham (ratty on here) has an 1150GS that is still on it's original clutch and now has 146000 miles on it.
No slippage or problems of any sort.
Steve
No slippage or problems of any sort.
Steve
Well-weathered leather
Hot metal and oil
The scented country air
Sunlight on chrome
The blur of the landscape
Every nerve aware
Hot metal and oil
The scented country air
Sunlight on chrome
The blur of the landscape
Every nerve aware
Re: Clutch life
I had an 1100 RT that failed at 18k 
Current 1100s all good at 35k, so fingers crossed
Phil
Current 1100s all good at 35k, so fingers crossed
Phil
R11s + Val Singleton Power filter - Lennies induct - Y Piece - Wilbers - PC111
1974 Honda CB750 1974 Triumph Trident T150 Oh and a GS-LC
1974 Honda CB750 1974 Triumph Trident T150 Oh and a GS-LC
Re: Clutch life
PostPosted: Wed Mar 29, 2017 8:22 am Post subject: DIY Clutch Plate replacement Reply with quote Edit/Delete this post
It seems that my 2007 r1200rt-p requires a replacement clutch after 35kmiles.
Having watched the Midland Police on Youtube clutch replacement video, has anyone and suggestions how to remove the rear frame assembly complete with rear wheel and drive train, is it just removal, after disconnecting wiring loom and brake hoses, of four frame bolts?
Update..
Job done myself in around 18hrs, with a total cost of £250 included clutch refurb of driveshaft, oils and consumables.
Whils a fiddly job it's perfectly simple, just a nuts and bolts project...Just have a good set of Torx drivers and quality tools.
It seems that my 2007 r1200rt-p requires a replacement clutch after 35kmiles.
Having watched the Midland Police on Youtube clutch replacement video, has anyone and suggestions how to remove the rear frame assembly complete with rear wheel and drive train, is it just removal, after disconnecting wiring loom and brake hoses, of four frame bolts?
Update..
Job done myself in around 18hrs, with a total cost of £250 included clutch refurb of driveshaft, oils and consumables.
Whils a fiddly job it's perfectly simple, just a nuts and bolts project...Just have a good set of Torx drivers and quality tools.
Who is online
Users browsing this forum: No registered users and 51 guests