hello there
was on an extended trip over the weekend in Germany and noticed a rattle from the xorst when riding on bumpy roads...
It doesnt look like anything external is loose - so I was wondering if the insides could have rusted apart?
Anybody here have any experience on the matter?
cheers,
Steen
R1100S - Rattle in exhaust
Moderators: Gromit, Paul, slparry
- The Teutonic Tangerine
- Posts: 1646
- Joined: Mon Jan 28, 2008 3:18 pm
- Location: Essex
- Contact:
Re: R1100S - Rattle in exhaust
The internals on my came loose and I managed to blag a spare set of cans from another forum member who had a set of remus cans on his from new. I suspect you can dismantle the silencers (remove the end caps and re weld the innards if you are clever).
There would appear to be a surfeit of prolixity and sesquipedalian content today please do not use a big word when a singularly un-loquacious and diminutive linguistic expression will satisfactorily accomplish the contemporary necessity
-
- Posts: 13
- Joined: Sat Jan 28, 2017 5:20 pm
Re: R1100S - Rattle in exhaust
ok thanks for the info, but I believe that on mine the sound is coming from the collector box below the gearbox (sorry, should have mentioned that in the OP )
It rattles when i knock on it with a (rubber) hammer...
It rattles when i knock on it with a (rubber) hammer...
Re: R1100S - Rattle in exhaust
I had exactly the same on my 1100S. Mechanic suggested a Y Piece to replace it, which luckily I had. I have since obtained an unused catalyic converter and end pipe. BMW mechanic did say that in Germany he had experiences of the loose parts in the cat blocking the flow of exhaust gas which then shut the engine down.
Re: R1100S - Rattle in exhaust
R1100Steen wrote:ok thanks for the info, but I believe that on mine the sound is coming from the collector box below the gearbox (sorry, should have mentioned that in the OP )
It rattles when i knock on it with a (rubber) hammer...
As above it's the catalytic converter (collector) breaking up . I'd imagine prohibitively expensive to replace , and a second hand one will probably be as noisy as your own. A y piece is probably the way to go , I replaced mine soon after purchase and never looked back.
_________________
Nigel
Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..
Nigel
Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..
Re: R1100S - Rattle in exhaust
Your born with a certain amout of heart beats, Dont waste them on exersise.
04 boxer cup rep. Gone but not forgoten
99 tlr1000 (V twin) tricked.
Indian Roadmaster Elite
Mercedes EQC 400
04 boxer cup rep. Gone but not forgoten
99 tlr1000 (V twin) tricked.
Indian Roadmaster Elite
Mercedes EQC 400
Re: R1100S - Rattle in exhaust
Check that the clamp up under rear seat hasn't come adrift.
2009 HP2 Sport...sold
2006 R1200s with yellow rim tape
2008 Ducati Monster S4RS Tricolore..sold
2004 R1100s BoxerCup Replika..sold
2006 Subaru WRX STI S204 #318/600
2006 R1200s with yellow rim tape
2008 Ducati Monster S4RS Tricolore..sold
2004 R1100s BoxerCup Replika..sold
2006 Subaru WRX STI S204 #318/600
-
- Posts: 13
- Joined: Sat Jan 28, 2017 5:20 pm
Re: R1100S - Rattle in exhaust
Lots of useful hints there - thanks guys, much appreciated
Ill check the easy bits first - such as the underseat clamp...
...and then start looking for a Y-piece
Btw - does this Y-thingy go on with the existing fittings - or do I need anything extra to go with it?
Again - thanks for all the info
Steen
Ill check the easy bits first - such as the underseat clamp...
...and then start looking for a Y-piece
Btw - does this Y-thingy go on with the existing fittings - or do I need anything extra to go with it?
Again - thanks for all the info
Steen
- The Teutonic Tangerine
- Posts: 1646
- Joined: Mon Jan 28, 2008 3:18 pm
- Location: Essex
- Contact:
Re: R1100S - Rattle in exhaust
R1100Steen wrote:ok thanks for the info, but I believe that on mine the sound is coming from the collector box below the gearbox (sorry, should have mentioned that in the OP )
It rattles when i knock on it with a (rubber) hammer...
Stop knocking it with a rubber hammer. Advice from the Tommy Cooper School of engineering
There would appear to be a surfeit of prolixity and sesquipedalian content today please do not use a big word when a singularly un-loquacious and diminutive linguistic expression will satisfactorily accomplish the contemporary necessity
-
- Posts: 13
- Joined: Sat Jan 28, 2017 5:20 pm
Re: R1100S - Rattle in exhaust
Of course - I should have known - I'll use the normal hammer then...
Who is online
Users browsing this forum: No registered users and 11 guests