ABS bleed problem. Control circuit 6.
Posted: Wed Feb 28, 2018 2:30 am
Hi Everyone.
Tech problem: I'm doing a fluid change on my ABS system.
(Using the UKGSer procedure)
All going very well until the last step - ie pumping fluid from the rear brake reservoir and out bleed nipple 6 on the ABS block.
Only pumps air with each press of the rear brake lever. Rear reservoir full. Circuits 3 and 5 pumped thru ok.
Would greatly appreciate any info.
Cheers.
Tech problem: I'm doing a fluid change on my ABS system.
(Using the UKGSer procedure)
All going very well until the last step - ie pumping fluid from the rear brake reservoir and out bleed nipple 6 on the ABS block.
Only pumps air with each press of the rear brake lever. Rear reservoir full. Circuits 3 and 5 pumped thru ok.
Would greatly appreciate any info.
Cheers.