Page 1 of 1
R1200S Paddock Stand
Posted: Sun Apr 08, 2018 8:35 pm
by DPG
I've always used an Abba stand for the BCR but the 12S sits way up high on it. Too high for oil changes really although its perfect for everything else.
I don't want to buy yet another Abba so I need a cheap rear paddock stand.
Any thoughts, comments, recommendations?
Price is an issue so "good for the money" is where I'm aiming. It's only for oil changes and jet washing the bike down. I can use the Abba stand for everything else..
Re: R1200S Paddock Stand
Posted: Mon Apr 09, 2018 3:35 pm
by dave the german
I'll find out what make mine is - think it came from Germany and the black one was cheaper than the red one!!(identical stands) - I'll post back
Re: R1200S Paddock Stand
Posted: Tue Apr 10, 2018 12:41 am
by Mitch1100
These are cheap
[
P1020161 by
Phil Mitchell, on Flickr][/img]
Re: R1200S Paddock Stand
Posted: Tue May 01, 2018 5:06 pm
by dysondiver
four bits of pipe ,,,
twenty quid at the most allowing for a bit of delrin ,, if you weld or know a welder
Re: R1200S Paddock Stand
Posted: Tue May 01, 2018 5:11 pm
by dysondiver
- hb4m-c-c20a.jpg (32.12 KiB) Viewed 9038 times
Re: R1200S Paddock Stand
Posted: Tue May 01, 2018 5:16 pm
by dysondiver
- handy stand.jpg (98.78 KiB) Viewed 9037 times
Re: R1200S Paddock Stand
Posted: Tue May 01, 2018 5:17 pm
by dysondiver
hope those pics help ,,, nice and simple diy project
Re: R1200S Paddock Stand
Posted: Wed May 02, 2018 6:49 am
by Justcruising
I initially got front & rear paddock stands for my R12S, BUT after acquiring the Becker-Technik Service Lifter I wouldn’t be without it and probably never bothered with the paddock stands had I found it first. See
http://shop.becker-technik.de/en/motorbike-lifters/20-bmw-r1200s-lifter.html
Re: R1200S Paddock Stand
Posted: Wed May 02, 2018 9:31 am
by popsky
Thought I’d finish buying things for my 12s but that lifter looks excellent, might have to get the cheque book out
