Help! Anyone in london with a stick coil puller?

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: Gromit, Paul, slparry

victorlaszlo
Posts: 304
Joined: Sat Mar 26, 2016 1:48 pm
Location: London

Help! Anyone in london with a stick coil puller?

Postby victorlaszlo » Fri Jun 08, 2018 9:18 am

Ideally a sturdy metal version, got my new stick coils just as one is about to fail (had 2 cut outs yesterday in london traffic) but can't remove the old one. Have lubed it and tried zip tying it up and use them to pull but they just break...

Steve W
Member
Posts: 371
Joined: Tue Feb 17, 2004 6:37 pm
Location: Plymouth, Devon

Re: Help! Anyone in london with a stick coil puller?

Postby Steve W » Fri Jun 08, 2018 3:09 pm

Hi

Believe I may have one - where in London are you.

Steve

victorlaszlo
Posts: 304
Joined: Sat Mar 26, 2016 1:48 pm
Location: London

Re: Help! Anyone in london with a stick coil puller?

Postby victorlaszlo » Fri Jun 08, 2018 3:11 pm

N7 - ordered one but if I can borrow one should it not turn up then that would be great!

Groceryrun
Posts: 8
Joined: Mon Oct 06, 2014 8:12 pm
Location: Central New Jersey, USA

Re: Help! Anyone in london with a stick coil puller?

Postby Groceryrun » Mon Jun 11, 2018 4:24 am

You can make due with a piece of stout string.
Just make a loop with the string of about 2 inches across.
Remove the wiring connector at the top of the stick coil.
Slide the loop of string under the stick coil - make sure the loop is entirely under the stick coil.
Put a stick, ratchet wrench handle , or screwdriver , thru the loop and pull straight out slowly.

The zip-tie you used is very slippery and not that flexible.
Try the string.

Some folks also use 2 screwdrivers to lever the stick coil out (and something to cushion the valve cover).


Return to “Boxertech”

Who is online

Users browsing this forum: No registered users and 61 guests