Clutch

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: Gromit, Paul, slparry

hooperman
Posts: 39
Joined: Tue Sep 22, 2009 6:59 pm
Location: Kent

Clutch

Postby hooperman » Tue Nov 20, 2018 9:13 am

Desperate for help with this. I have replaced the clutch plate after the centre stripped. It is all back and on the road and rideable - just - but when releasing the clutch lever in gear, the clutch engages very early - less than half way released. There is pressure from the start when the clutch level is pulled but the clutch disengages very late. Why? What have I done wrong? I believe I have bled all of the air out - but am not certain. Any ideas would be very gratefully received.

yeloduke
Posts: 3
Joined: Mon Aug 27, 2018 4:40 am

Re: Clutch

Postby yeloduke » Wed Nov 21, 2018 4:11 am

:D :D After bleeding the clutch try putting a cable tie around the grip and clutch lever to hold the lever in overnight and turn the bars to the right to keep the reservoir upright. This allows any air bubbles to escape. Works a treat. :P

Let us know how you go. :bounce:
Last edited by yeloduke on Thu Nov 22, 2018 9:52 am, edited 1 time in total.

SP250
Posts: 982
Joined: Mon Sep 09, 2013 2:01 pm
Location: Shropshire

Re: Clutch

Postby SP250 » Wed Nov 21, 2018 2:52 pm

I'll second that - works on brake lines too.
John M


Return to “Boxertech”

Who is online

Users browsing this forum: No registered users and 41 guests