Valve adjustment

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: Gromit, Paul, slparry

cillasman
Posts: 65
Joined: Sat Aug 13, 2011 8:10 pm
Location: Hampshire

Valve adjustment

Postby cillasman » Sun Aug 18, 2019 6:58 pm

Serviced the 1200rt this morning, valves seemed pretty tight so adjusted exhaust to .3 and inlet to .15 is this correct as it sounds more tappy now
Two heads are better than one.!

User avatar
milleplod
Posts: 866
Joined: Mon Mar 25, 2013 6:46 am

Re: Valve adjustment

Postby milleplod » Wed Aug 21, 2019 4:26 pm

I believe those measurements are correct. Did you do them when the engine was stone cold? And did you do the rocker arm end float too?....that needs setting between 0.05 and 0.40mm, a big range, and consensus is that it's better to aim for the smaller measurement as it keeps things quieter and the bike will run better too.

Pete
Nocto Diuque Venamur

cillasman
Posts: 65
Joined: Sat Aug 13, 2011 8:10 pm
Location: Hampshire

Re: Valve adjustment

Postby cillasman » Fri Aug 23, 2019 5:53 pm

Thanks Pete checked them again i think i didnt have the off side on compression stroke, all is well now.
Two heads are better than one.!

User avatar
milleplod
Posts: 866
Joined: Mon Mar 25, 2013 6:46 am

Re: Valve adjustment

Postby milleplod » Fri Aug 23, 2019 6:28 pm

cillasman wrote:Thanks Pete checked them again i think i didnt have the off side on compression stroke, all is well now.


Good oh, nowt worse than rattling tappets! :lol:
Nocto Diuque Venamur

dave the german
Member
Posts: 3614
Joined: Tue Nov 01, 2005 4:35 am
Location: North East

Re: Valve adjustment

Postby dave the german » Sat Aug 24, 2019 9:26 am

milleplod wrote:
cillasman wrote:Thanks Pete checked them again i think i didnt have the off side on compression stroke, all is well now.


Good oh, nowt worse than rattling tappets! :lol:


Not sure about that mind - pub with no beer? :wink:
'15 R1200GS TE
'06 R1200S
'04 BCR
Yam SR 500 long term restoration
wanna win the lottery and ride my bike


Return to “Boxertech”

Who is online

Users browsing this forum: No registered users and 62 guests