Rear light - LED

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: Gromit, Paul, slparry

Post Reply
User avatar
Harry
Member
Posts: 752
Joined: Fri Feb 20, 2004 10:08 am
Location: Home of the Saints

Rear light - LED

Postby Harry » Thu Apr 08, 2004 9:26 am

Paul,
can you post up (again) where you got your rear LED from?
Ta. Harry.
Top
Steve W
Member
Posts: 371
Joined: Tue Feb 17, 2004 6:37 pm
Location: Plymouth, Devon

Postby Steve W » Thu Apr 08, 2004 4:14 pm

Harry

Not sure were Paul got his light from, but M TEC in Germany stock them together with other options.

http://www.boxerparts.com/

Steve
Top
User avatar
boxerpan
Posts: 2234
Joined: Thu Feb 19, 2004 6:48 pm
Location: waving, not drowning. Warwicks

Postby boxerpan » Thu Apr 08, 2004 5:30 pm

Harry,
motorworks stock them and they are sooooo... easy to fit even I managed it :!: The surround comes in primer so you will need spray paint to match and laquer (if its metallic). Can look up the price if you require

Lloyd
Top
User avatar
Paul
Wanna buy a sticker mister?
Posts: 2866
Joined: Mon Feb 16, 2004 8:44 pm
Location: Boxertrix Towers, Norfolk
Contact:
Contact Paul

Postby Paul » Fri Apr 09, 2004 9:52 am

Harry,

About £105 from Motorworks. Don't forget to order up some paint too. It is a really easy job to fit.

Cheers,

Paul
You really need only two tools: WD-40 and duct tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the tape.
Top
User avatar
theseadog
Posts: 572
Joined: Sun Mar 14, 2004 12:47 pm
Location: Official Club Scotsman, West Coast Of Scotland

Frelling HOW MUCH ?????

Postby theseadog » Mon Apr 26, 2004 10:55 pm

For some PCB and LEDS, you are having a Giraffe.....AT that frellin price I'd expect the buggers to come and fit the bloody thing for me, and make me a cup of tea,
and a bacon roll,
and wash it for me, no the bike !

I use MW for most things but frell me that's outrageous, and it's not even frelling finished, you got paint to fucker yourself, I think not young Rodney.....

Paul wrote:Harry,

About £105 from Motorworks. Don't forget to order up some paint too. It is a really easy job to fit.

Cheers,

Paul
Top
User avatar
boxerpan
Posts: 2234
Joined: Thu Feb 19, 2004 6:48 pm
Location: waving, not drowning. Warwicks

Postby boxerpan » Tue Apr 27, 2004 6:54 am

It's cos it's Jerrmann and has to be put thru the rigorous TuV crash testing procedure :)

Lloyd
Top
User avatar
Paul
Wanna buy a sticker mister?
Posts: 2866
Joined: Mon Feb 16, 2004 8:44 pm
Location: Boxertrix Towers, Norfolk
Contact:
Contact Paul

Postby Paul » Tue Apr 27, 2004 8:56 am

Gents,

You can get the LED bit for about £35, but the expensive bit is the custom surround which fits into the hole left by the original big red light.

Cheers,

Paul
You really need only two tools: WD-40 and duct tape. If it doesn't move and it should, use WD-40. If it moves and shouldn't, use the tape.
Top
Post Reply

Return to “Boxertech”

Who is online

Users browsing this forum: No registered users and 74 guests