Suspension settings

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: Gromit, Paul, slparry

User avatar
a-jay26
Posts: 47
Joined: Fri Mar 05, 2004 9:03 pm

Suspension settings

Postby a-jay26 » Wed Aug 11, 2004 10:42 pm

Hi there,

I'm sure this has been asked a thousand times but here goes again.....

I was out today on my bike and it was just terrible at going over bumps!! Maybe it was just me, but I had been twiddling the rear pre-load adjusted.

Can anyone tell me a good base setting. I am 6'2" or so and about 15 stone and normally ride just myself but on occasioons the 'Bird' comes too....she doesn't know about this site so I am safe!!

Does anyone really think the adjuster for the front suspension (infront of the tank) does anything as I can't feel any differance?? Maybe it just me but any help would be great.

Thanks

User avatar
crucial
Member
Posts: 268
Joined: Fri Feb 20, 2004 9:12 am
Location: Probably filtering on the M25

Postby crucial » Thu Aug 12, 2004 10:44 am

As far as i could tell the adjusters did nowt on my original suspension. Get yourself some Ohlins, technoflex,WP etc. :)

User avatar
Ade B
Posts: 915
Joined: Sun Mar 21, 2004 6:11 pm
Location: London

Postby Ade B » Sun Aug 15, 2004 5:01 pm

I always add a couple of turns of preload to the rear before I go 2up with luggage.

Can't remember if I take it off again afterwards. :wink:
2000 R1100S Sport
1980 Vespa P125X

User avatar
stempy
Captain
Posts: 690
Joined: Wed Feb 18, 2004 8:41 pm
Location: I could tell you but then I'd have to kill you
Contact:

Postby stempy » Sun Aug 15, 2004 5:29 pm

The front does make a difference but only really at the extremes of adjustment, it's a bit crude. Try it 5 clicks out from max. The rear pre load on my old shock was about 26 - 30 clicks from min and the damping was half to three quarters of a turn out from max, but again it's a bit crude.

User avatar
PBBoxer
Posts: 3211
Joined: Wed Mar 03, 2004 5:41 pm
Location: Yorkshire

Postby PBBoxer » Tue Aug 17, 2004 9:10 am

I'm 6'4 and approx 16 1/2 stone.
I had the rear set to approx 6 clicks from max and the front didnt make much difference, but i had it to also approx 3/4 towards max
worked really well until i binned it!
1997 CBR1100XXV
1999 CBR1100XX
2009 HP2 Sport
2006 R1200s
2013 R1200RT anniversary


Return to “Boxertech”

Who is online

Users browsing this forum: No registered users and 21 guests