BCR Exhaust
Moderators: Gromit, Paul, slparry
BCR Exhaust
Recommendations please. As I am refurbishing my BCR, do I leave the standard system (with laser cans) on or do I make changes - if so, what do people suggest?
Thanks
Peter
Thanks
Peter
Taz
R1250RS
So when is this 'Old enough to know better' supposed to kick in?
R1250RS
So when is this 'Old enough to know better' supposed to kick in?
Exhaust
Al,
Thanks for the advice. Two questions, if I may:
1) Where would I get a Y piece, and
2) Do I need to rechip the electronics if I remove the cat?
Many thanks
Peter
Thanks for the advice. Two questions, if I may:
1) Where would I get a Y piece, and
2) Do I need to rechip the electronics if I remove the cat?
Many thanks
Peter
Taz
R1250RS
So when is this 'Old enough to know better' supposed to kick in?
R1250RS
So when is this 'Old enough to know better' supposed to kick in?
-
- Posts: 380
- Joined: Sun May 26, 2013 4:47 pm
- Location: London
Blackal wrote:Depends - can you wait for a Remus or Staintune to appear, and shell out around £450 for the privelage?
Go for a Y-piece and keep the laser cans, is all I would do.
Al
I'm with you. Get a y-piece and keep the Lasers. I wouldn't have said the Remus or Staintune would be an upgrade on that.
Speaking from experience go with a Laser y-piece over the Remus one if you can find one. The design is better and they're stronger.
2000 BMW R1150GS
2004 BMW R1100SS Boxer Cup Replica
2003 Yamaha R6 (trackday bike)
2004 BMW R1100SS Boxer Cup Replica
2003 Yamaha R6 (trackday bike)
-
- Posts: 380
- Joined: Sun May 26, 2013 4:47 pm
- Location: London
Cannot say for the GS, but the Boxercup with the Y piece and no chip didn't run very well and very, very lean.
You loose a quite a lot of the low end with just the Y and no chip.
A Laser chip is around 100 quid and worth the expense.
I had a Mamola (chipped) and my Boxercup (not chipped at the time) together for 6 months at the time.
Riding one, dropping it at the parking and then riding the other one immediately after... the difference was noticeable.
You loose a quite a lot of the low end with just the Y and no chip.
A Laser chip is around 100 quid and worth the expense.
I had a Mamola (chipped) and my Boxercup (not chipped at the time) together for 6 months at the time.
Riding one, dropping it at the parking and then riding the other one immediately after... the difference was noticeable.
R1150R '03 (in pieces)
R1200GS '07 Adv
HP2 Sport '11
[I'm the biggest limit on my bike]
R1200GS '07 Adv
HP2 Sport '11
[I'm the biggest limit on my bike]
Laser Chip
Er-minio thanks.
Any idea where I can get a laser chip?
Any idea where I can get a laser chip?
Taz
R1250RS
So when is this 'Old enough to know better' supposed to kick in?
R1250RS
So when is this 'Old enough to know better' supposed to kick in?
Bloody hell! That's a chunk of change!
Hilltop Motorcycles claim to be able to re-map the R1100s, although I don't know of anyone getting it done.
It would cost about the same, but you have nothing to sell afterwards (unless you got a standard chip to replace it with)
Al
Hilltop Motorcycles claim to be able to re-map the R1100s, although I don't know of anyone getting it done.
It would cost about the same, but you have nothing to sell afterwards (unless you got a standard chip to replace it with)
Al
If I am ever on life support - Unplug me......
Then plug me back in..........
See if that works .....
Then plug me back in..........
See if that works .....
There are some on ebayfrom Hermany for £60, might be worth an email telling them what you want to do and see if they can help.
Al.
Al.
White/red BMW R1200R Sport
Shiny Red Honda Civic
Shiny Silver MR2 vvti Roadster. Going to be sold
White Peugeot Boxer Camper Conversion.
Battle scarred Suzuki Burgman 125,(Mrs Als) going to be sold
Suzuki VanVan 125
Shiny Red Honda Civic
Shiny Silver MR2 vvti Roadster. Going to be sold
White Peugeot Boxer Camper Conversion.
Battle scarred Suzuki Burgman 125,(Mrs Als) going to be sold
Suzuki VanVan 125
I got it directly from the italian Laser importer at the time (same place where I bought the Laser chip for my R1150R).
I think it was around 200 euros, maybe a tad less.
Let me check if I still have the chip code, as you'll need the specific one for twin/monospark of course.
I think it was around 200 euros, maybe a tad less.
Let me check if I still have the chip code, as you'll need the specific one for twin/monospark of course.
R1150R '03 (in pieces)
R1200GS '07 Adv
HP2 Sport '11
[I'm the biggest limit on my bike]
R1200GS '07 Adv
HP2 Sport '11
[I'm the biggest limit on my bike]
87.7010.Y
The product code for the Twin Spark Laser Eprom chip intended for bikes fitted with an Y piece.
Replacing the chip is an interesting procedure that requires some cutting through silicone to open the motoronic casing.
Pretty sure there is some guide here in Boxertrix in some old threads.
The product code for the Twin Spark Laser Eprom chip intended for bikes fitted with an Y piece.
Replacing the chip is an interesting procedure that requires some cutting through silicone to open the motoronic casing.
Pretty sure there is some guide here in Boxertrix in some old threads.
Last edited by er-minio on Tue Jun 02, 2015 2:52 pm, edited 2 times in total.
R1150R '03 (in pieces)
R1200GS '07 Adv
HP2 Sport '11
[I'm the biggest limit on my bike]
R1200GS '07 Adv
HP2 Sport '11
[I'm the biggest limit on my bike]
Who is online
Users browsing this forum: No registered users and 11 guests