Factory Alarm not working

Got a technical query? Found another 0.02bhp? Ask/tell the world.

Moderators: Paul, slparry, Gromit

jmhill373
Posts: 9
Joined: Fri Jan 04, 2013 10:24 am

Factory Alarm not working

Postby jmhill373 » Thu Jul 12, 2018 9:18 am

Hi,

My factory fitted R1200S alarm isn't working.

Is it possible for the fob to become out of sync with the alarm unit?

Jon

Wales
David_S_Walker
Posts: 206
Joined: Mon Apr 09, 2012 3:59 pm
Location: Meopham, Kent

Re: Factory Alarm not working

Postby David_S_Walker » Thu Jul 12, 2018 9:55 am

Hello,

There is an internal battery in the alarm unit which you can change yourself and it does go after a few years. That might be your issue?

Not much help but I got a replacement from Maplins....

Hope that helps.

Best regards,

David
The Hokey Cokey. What if that is what life is all about?
BMW R1200S-2006 with much carbon,PCIII & Schnitzer
Honda Crosstourer Highlander VFR1200XDF T-DCT 2016
KTM 400 EXC 2006
Subaru Outback 3.0 R N 2006

jmhill373
Posts: 9
Joined: Fri Jan 04, 2013 10:24 am

Re: Factory Alarm not working

Postby jmhill373 » Thu Jul 12, 2018 10:20 am

Hi David,

Many thanks, I'll give that a try.

Jon

jmhill373
Posts: 9
Joined: Fri Jan 04, 2013 10:24 am

Re: Factory Alarm not working

Postby jmhill373 » Fri Jul 20, 2018 6:50 am

Hi

Opened the alarm up batteries are at 100%?

Any other ideas? could it be the wiring or is the unit kaput?

Regards,

Jon

England
Cusi
Posts: 22
Joined: Thu May 06, 2004 3:57 pm
Location: King's Lynn

Re: Factory Alarm not working

Postby Cusi » Thu Aug 09, 2018 8:33 pm

If it's the same as mine DWA6 then the manual states that if the buttons are pressed 256 times outside range of receiver then it will need to be synchronised.

Procedure as follows

Press and hold down buttons 1 and 2 LED on fob flashes

LED stops flashing after 10 sec then release buttons 1 and 2

Press button 1 or 2 LED on fob should remain off

job done

Don't forget ignition needs to have been recently activated for alrm to be set.

Hope this helps
Never sacrifice position for safety


Return to “Boxertech”

Who is online

Users browsing this forum: No registered users and 1 guest