Bonding with the K1

This is the forum for current/former/aspiring 'S owners to discuss their other two wheeled choices.

Moderators: Gromit, Paul, slparry

User avatar
slparry
Moderator
Posts: 6589
Joined: Sat Sep 20, 2008 7:19 pm
Location: Wrexham
Contact:

Bonding with the K1

Postby slparry » Mon Jun 24, 2019 10:13 pm

Today has been a great ride out day to get familiar with the K1.

Absolutely loving it, it's a bit of a flyer, covering ground quickly and efficiently. The ride is similar to the K100RS's I've had in the past but with a bit more sportiness to it.

Handles very well, brakes are awesome all told a fun day. Just amazes me that it's 30 years old!

1.jpg
1.jpg (94.68 KiB) Viewed 13485 times


2.jpg
2.jpg (95.74 KiB) Viewed 13485 times


3.jpg
3.jpg (106.42 KiB) Viewed 13485 times
--
Steve Parry


Current fleet: '14 F800GS, '87 R80RS, '03 R1100S BoxerCup, '15 R1200RT LE Dynamic, '90 K1

User avatar
ianc53
Member
Posts: 701
Joined: Thu Feb 19, 2004 5:22 pm
Location: The Kingdom of Fife

Re: Bonding with the K1

Postby ianc53 » Tue Jun 25, 2019 6:05 am

Glad you're enjoying Steve. It will certainly get attention where ever it goes.
Who's your mate? :D

Cheers

Ian
Motorrad R1250RS SE 2023
Blue R100RS 1980
Suzuki GT250B 1977

User avatar
nab 301
Member
Posts: 2374
Joined: Sat Dec 04, 2004 6:41 pm
Location: Dublin Ireland

Re: Bonding with the K1

Postby nab 301 » Tue Jun 25, 2019 7:18 pm

Looks great !
As this is a BMW forum , what's the MPG like....? :wink:
_________________
Nigel

Keep smiling, it makes people wonder what you've been up to!
1999 R1100s (mandarin) '
2018 DL 250V Strom
2019 CB125F Honda.
MZ301 Saxon Fun ( currently retired)
'03 Bullet 65 project..

User avatar
Blackal
Posts: 8241
Joined: Fri Jul 29, 2005 7:53 pm

Re: Bonding with the K1

Postby Blackal » Wed Jun 26, 2019 4:30 am

Think that bike will always be ‘cool’ :wink:
If I am ever on life support - Unplug me......
Then plug me back in..........

See if that works .....
:?

User avatar
slparry
Moderator
Posts: 6589
Joined: Sat Sep 20, 2008 7:19 pm
Location: Wrexham
Contact:

Re: Bonding with the K1

Postby slparry » Sun Jun 30, 2019 7:58 am

nab 301 wrote:Looks great !
As this is a BMW forum , what's the MPG like....? :wink:


Not been checking..... at the moment I'm using my sat nav as a speedo as the clocks have succumbed to the K misted clocks. Got a replacement set to put on when I get a bit of time :)

gps2.jpg
gps2.jpg (49.85 KiB) Viewed 13386 times


gps1.jpg
gps1.jpg (73.66 KiB) Viewed 13386 times
--
Steve Parry


Current fleet: '14 F800GS, '87 R80RS, '03 R1100S BoxerCup, '15 R1200RT LE Dynamic, '90 K1

User avatar
slparry
Moderator
Posts: 6589
Joined: Sat Sep 20, 2008 7:19 pm
Location: Wrexham
Contact:

Re: Bonding with the K1

Postby slparry » Wed Jul 03, 2019 9:30 pm

I was off on Monday so me and Paul Davies (WW TEC) put the bike up on the ramp and spent the day servicing it and generally fettling.

First task was the speedo wasn't working, the previous owner have cracked the tacho lens so water had got in. Upon removing I was shocked when dismantling the console to find the speedo pcb sat in a half inch of water.... I'd got a good speedo off ebay from a K100RS 16v. It's obviously got the wrong mileage on it but they're easy to adjust and at some point will dismantle it and correct the mileage, whilst in there I'll swap the clock facias and needles as the RS ones are white and the K1's are yellow. Sure I could just leave it but it may as well be "right" :D

Any upshot is the speedo is now working!

Spent ages trying to find the ABS diagnostic plug. It's in a different location to the previous RS's I'd had. Anyway once found did some diagnostics with the multimeter, counting the needle swings, which indicated it was only needing reset because of the battery having gone bad previously …. so with fingers crossed performed the ABS reset. Sometimes you have to repeat the reset because it's an old system and can only deal with one request at a time so if there's a couple of faults stored they have to be cleared individually. Plus you don't know if it's "reset" until you ride it. However, I was hopeful after I saw the meter sit as a constant voltage and not swinging from 0 to + volts.

Went to pull the bike backwards onto the drive with the intention of riding up the drive to hopefully get enough speed to get the ABS lights to turn off but even pulling it backwards was fast enough for the sensors to trigger and WAHAY the abs light went out.... subsequent stamping on the rear brake whilst out on a ride confirms the ABS is now functioning :D

Then we did the service, Mobil 1 15w50 Racing Motorcycle oil, OEM filter, new NGK spark plugs (for some reason it had DPR7EA's in (which are projected resistor plugs) OEM spec in NGK is D7EA's but I've always run my K's on slightly colder D8EA's given I work my bikes quite hard (throwback to my 2 stroke days). Anyway a set of D8EA's in, then set the injector body balance and tickover (set at the lower end of 900rpm because I like lower tickover…. factory spec is 900 to 1000 rpm)

The whole thing is now smoother and quicker. There was a flat spot at 4000 rpm which has gone :)

Next week I'll change the gearbox and final drive oils with some 80w90 Mobil 1 synthetic, makes the gearboxes nice and slick on older K's.

I'll also hunt out my CO meter and test the CO levels are within spec.

Only thing not working now is the gear position indicator and the neutral light. I've ordered a new switch but will probably not bother doing the job until some time in the future. At present it's showing 4 when in 1st, 5 when in neutral, blank in 2nd, blank in 3rd, then real 4th and 5th it shows correctly.

The reason for the hesitancy in replacing the switch is that it's at the rear of the gearbox and you have to remove the swingarm to get to it, plus its screws can be seized in so doing it is not to be taken lightly. Given it will often crumble when you start messing with an old one I'll put it on the "job to do if I'm there doing something else" list :D

But it's pretty much now all working, cruises lovely at 80 to 90 and is only just getting into its stride at three figures :D

Thanks to the Ohlins shock and the Metzeler Z8 Interact it seems to handle well too. I think the think that impresses me most tho' is for a 30 year old bike the brakes are awesome :D
--
Steve Parry


Current fleet: '14 F800GS, '87 R80RS, '03 R1100S BoxerCup, '15 R1200RT LE Dynamic, '90 K1

User avatar
slparry
Moderator
Posts: 6589
Joined: Sat Sep 20, 2008 7:19 pm
Location: Wrexham
Contact:

Re: Bonding with the K1

Postby slparry » Sat Jul 13, 2019 6:09 pm

ianc53 wrote:Glad you're enjoying Steve. It will certainly get attention where ever it goes.
Who's your mate? :D

Cheers

Ian


Hi Ian, that's Paul Davies the "tail end Charlie" from the 'Trix Welsh weekends :D
--
Steve Parry


Current fleet: '14 F800GS, '87 R80RS, '03 R1100S BoxerCup, '15 R1200RT LE Dynamic, '90 K1

User avatar
ianc53
Member
Posts: 701
Joined: Thu Feb 19, 2004 5:22 pm
Location: The Kingdom of Fife

Re: Bonding with the K1

Postby ianc53 » Mon Jul 15, 2019 9:17 am

Thanks Steve, didn't recognise him from his 'action pose' :D , thought you might have been photo-bombed!

Cheers

Ian
Motorrad R1250RS SE 2023
Blue R100RS 1980
Suzuki GT250B 1977

User avatar
slparry
Moderator
Posts: 6589
Joined: Sat Sep 20, 2008 7:19 pm
Location: Wrexham
Contact:

Re: Bonding with the K1

Postby slparry » Mon Sep 30, 2019 6:43 pm

Just to prove you can find "hobby horse shit" ….

I've managed to locate an original 1990 BMW luggage system for the K1 in Canada :D

Just arrived today …. whoo oooo


k1bag.jpg
k1bag.jpg (180.62 KiB) Viewed 12857 times
--
Steve Parry


Current fleet: '14 F800GS, '87 R80RS, '03 R1100S BoxerCup, '15 R1200RT LE Dynamic, '90 K1


Return to “My other bike's a...”

Who is online

Users browsing this forum: No registered users and 18 guests